Sony DVW-970P ユーザーズマニュアル
146
Menu List
Ap
pend
pend
ix
e
s
M04
BATTERY
BEFORE END 1
5/10/15 to 95/100%
(in 5% steps)
(in 5% steps)
5%
Used when a Sony-made battery pack, such
as BP-GL65/GL95, is used. Set the voltage
warning level just before the battery ends.
as BP-GL65/GL95, is used. Set the voltage
warning level just before the battery ends.
END 1
0/1/2/3/4/5%
0%
Used when a Sony-made battery pack, such
as BP-GL65/GL95, is used. Set the voltage
level at which the battery ends and the
camcorder stops operation, just before the
battery ends.
as BP-GL65/GL95, is used. Set the voltage
level at which the battery ends and the
camcorder stops operation, just before the
battery ends.
BEFORE END 2
11.0 to 17.0 V
(in 0.1 V steps)
(in 0.1 V steps)
11.3
Used when a Sony-made battery pack, such
as BP-L60S, is used. Set the voltage warning
level just before the battery ends.
as BP-L60S, is used. Set the voltage warning
level just before the battery ends.
END 2
10.5 to 11.5 V
(in 0.1 V steps)
(in 0.1 V steps)
11.0
Used when a Sony-made battery pack, such
as BP-L60S, is used. Set the voltage level at
which the battery ends and the camcorder
stops operation, just before the battery ends.
as BP-L60S, is used. Set the voltage level at
which the battery ends and the camcorder
stops operation, just before the battery ends.
BEFORE END 3
11.0 to 17.0 V
(in 0.1 V steps)
(in 0.1 V steps)
11.8
Used when a battery pack other than a Sony-
made one or an external power connected to
the DC IN connector is used. Set the voltage
warning level just before the battery ends.
made one or an external power connected to
the DC IN connector is used. Set the voltage
warning level just before the battery ends.
END 3
10.5 to 14.0 V
(in 0.1 V steps)
(in 0.1 V steps)
11.0
Used when a battery pack other than a Sony-
made one or an external power connected to
the DC IN connector is used. Set the voltage
level at which the battery ends and the
camcorder stops operation, just before the
battery ends.
made one or an external power connected to
the DC IN connector is used. Set the voltage
level at which the battery ends and the
camcorder stops operation, just before the
battery ends.
BATT REMAIN
DISP
DISP
1/2/3
1
1: Standard mode
2: LCD remaining indication mode: One
2: LCD remaining indication mode: One
x
on
the LCD indicates 10% for a battery
classified in <Others..., EXT DC> type.
classified in <Others..., EXT DC> type.
3: ANTON mode: Remaining detection of the
ANTON type is made even for a battery
classified in <SONY> type.
classified in <SONY> type.
M05
AUDIO-1
AUDIO OUT (F/R)
CUE/EE
EE
Selects the audio output signal during FF/
REW.
CUE: cue audio signal
EE: Input signal
REW.
CUE: cue audio signal
EE: Input signal
REC AUDIO OUT
EE/SAVE
EE
Selects the audio output signal during
recording.
EE: Input signal
SAVE: Not to outputl
recording.
EE: Input signal
SAVE: Not to outputl
CA-701 AUDIO IN
ENABL/DSABL
ENABL
When a CA-701 camera adaptor is
connected, select whether or not to enable
input of audio channels 3 and 4 from the
camera adaptor.
ENABL: Camera adaptor can be used.
DSABL: Camera adaptor cannot be used.
connected, select whether or not to enable
input of audio channels 3 and 4 from the
camera adaptor.
ENABL: Camera adaptor can be used.
DSABL: Camera adaptor cannot be used.
AUDIO CH3/4
MODE
MODE
CH1/2/SW
SW
Selects the sources to be recorded to
channels CH-3/4.
CH1/2: Same sources as CH-1/2.
SW: Signals selected by the AUDIO IN CH-3/
channels CH-3/4.
CH1/2: Same sources as CH-1/2.
SW: Signals selected by the AUDIO IN CH-3/
CH-4 switches.
REAR XLR AUTO
OFF/ON
OFF
Turns the XLR connection automatic
detection on/off .
detection on/off .
FRONT MIC REF
–60 dB/–50 dB/–40
dB
dB
–60 dB
Sets the reference level of the front
microphone.
microphone.
REAR MIC REF
–60 dB/–50 dB/–40
dB
dB
–60 dB
Sets the reference level when the AUDIO IN
CH1 or CH2 connector is set to MIC.
CH1 or CH2 connector is set to MIC.
No.
Page
Item
Settings
Default
Description