Sony DCR-SR65 ユーザーズマニュアル

the AC Adaptor from the DC IN jack. 

Disconnect the AC Adaptor from the 

DC IN jack holding both the DC plug 

and the Handycam Station (DCR-SR65/

SR85) or your camcorder (DCR-SR45/

SR46).



 For DCR-SR65/SR85:



 Same as DCR-SR45/SR46, you can charge the 

battery pack by connecting the AC Adaptor 

to your camcorder.

Turn off the power, then remove the 

camcorder from the Handycam Station 

holding both your camcorder and the 

Handycam Station.

Turn the POWER switch to OFF (CHG).

Slide the BATT (battery) release lever and 

remove the battery pack.





 When you remove the battery pack or 

disconnect the AC Adaptor, make sure that the 

 (Movie) lamp/  (Still) lamp (p. 17)/

ACCESS lamp (p. 25) is turned off.



 When you store the battery pack, fully discharge 

the battery before storing it for an extended 

period (see page 92 for the details of storage).

Make the same connections as you do when 

charging the battery pack. The battery pack 

will not lose its charge in this case.

Set the POWER switch to OFF (CHG), 

then press DISP/BATT INFO. 

After a while, the approximate recordable 

time and battery information appear for 

about 7 seconds. You can view the battery 

information for up to 20 seconds by 

pressing DISP/BATT INFO again while the 

information is displayed.

 



BATT (battery) 

release lever

Remaining battery (approx.)

Recording capacity (approx.)