Sony DCR-DVD808 ユーザーガイド
67
Cu
st
st
om
iz
iz
ing y
our c
a
m
co
rde
r
r
You can compensate for camera shake (the
default setting is [ON]). Set
[STEADYSHOT] to [OFF] (
default setting is [ON]). Set
[STEADYSHOT] to [OFF] (
) when
using a tripod (optional), then the image
becomes natural.
becomes natural.
When this is set to [ON] (the default
setting), the shutter speed is automatically
reduced to 1/30 second when recording in
dark conditions.
setting), the shutter speed is automatically
reduced to 1/30 second when recording in
dark conditions.
You can display the frame and check that
the subject is horizontal or vertical by
setting [GUIDEFRAME] to [ON].
The frame is not recorded. Press DISP/
BATT INFO to make the frame disappear.
the subject is horizontal or vertical by
setting [GUIDEFRAME] to [ON].
The frame is not recorded. Press DISP/
BATT INFO to make the frame disappear.
z
Tips
• Positioning the subject at the cross point of the
guide frame makes a balanced composition.
Diagonal stripes appear in portions of the
screen where brightness is at a preset level.
This is useful as a guide when adjusting the
brightness. When you change the default
setting,
screen where brightness is at a preset level.
This is useful as a guide when adjusting the
brightness. When you change the default
setting,
is displayed. The zebra pattern
is not recorded.
B
OFF
The zebra pattern is not displayed.
70
The zebra pattern appears at a screen
brightness level of about 70 IRE.
brightness level of about 70 IRE.
100
The zebra pattern appears at a screen
brightness level of about 100 IRE or
higher.
brightness level of about 100 IRE or
higher.
b
Notes
• Portions of the screen where brightness is about
100 IRE or above may appear overexposed.
z
Tips
• IRE represents the screen brightness level.
B
AUTO
Displays the remaining disc indicator for
about 8 seconds in situations such as those
described below.
about 8 seconds in situations such as those
described below.
– When your camcorder recognizes the
remaining disc capacity with the POWER
switch set to
switch set to
(Movie).
– When you press DISP/BATT INFO to
switch the indicator from off to on with
the POWER switch set to
the POWER switch set to
(Movie).
– When you select the movie recording
mode on the HOME MENU.
ON
Always displays the remaining disc
indicator.
indicator.
b
Notes
• When the remaining recordable time for movies
is less than 5 minutes, the indicator stays on the
screen.
screen.
Select [ON] (the default setting) to display
the recording date and time when you play
back a disc on a device with a subtitle
display function. Also refer to the
instruction manual of the playback device.
the recording date and time when you play
back a disc on a device with a subtitle
display function. Also refer to the
instruction manual of the playback device.
You can set this function when you use the
built-in flash, or an external flash (optional)
that is compatible with your camcorder.
built-in flash, or an external flash (optional)
that is compatible with your camcorder.
HIGH (
)
Makes the flash level higher.
B
NORMAL ( )
STEADYSHOT
AUTO SLW SHUTTR
(Auto slow shutter)
(Auto slow shutter)
GUIDEFRAME
ZEBRA
REMAINING
SUB-T DATE
FLASH LEVEL
Continued
,