Fujitsu MCE3064SS ユーザーズマニュアル
C156-E097-01EN
6 - 3
(3)
Write/read test
Use a disk whose operation check data may be destroyed so that a write or read test can be
executed with an arbitrary data pattern.
executed with an arbitrary data pattern.
6.2
Maintenance Information
6.2.1
Maintenance requirements
Service system and repair
Fujitsu provides a service system and repair facility for its optical disk drive. Submit
information required to replace or repair the drive to your Fujitsu representative. The following
information should be included:
information required to replace or repair the drive to your Fujitsu representative. The following
information should be included:
a) Optical disk drive model, part number (P/N), revision number, serial number (S/N), and date
of manufacture
b) Failure status
•
Date of the failure
•
System configuration
•
Environment conditions (temperature, humidity, and supply voltage)
c) Failure history
d) Failure
•
Description of the failure
•
Issued commands and specified parameters
•
Sense data
•
Other error analysis information
Data loss
In case of regular repair, the optical disk cartridge should not be
attached except where the cartridge causes the error. And before
having the drive repaired, save the data in the cartiridge. Fujitsu is
not responsible for data lost during maintenance or repair.
In case of regular repair, the optical disk cartridge should not be
attached except where the cartridge causes the error. And before
having the drive repaired, save the data in the cartiridge. Fujitsu is
not responsible for data lost during maintenance or repair.
See Section 4.1 for details on packing and handling the drive when sending it to Fujitsu.