Fujitsu MCE3064SS ユーザーズマニュアル

2 - 6

C156-E097-01EN

Item

Specification

Air flow (*3)

Unused

Air purity

General office environment or better
(dust perticles: Class 5 millions or less)

1.

Current limiter value for +5 VDC power:  5 A or less

2.

Specifications under transporting condition are under the packaging specified by
Fujitsu.

3.

A voltage drop may occur depending on the used power supply or power cable.

*1 At random seek or read/write.  Excluding pulse waveform under 500 

µ

s or less.

*2 It demonstrates a power of 5.3 W in an installation environment of a temperature of 25°C,

voltage of 5 V and with terminating resistor turned off.

*3 The efficiency is specified in an environment of a temperature of 25°C and 0° horizontal

level placement.

*4 For details, refer to section 3.1.3 ‘Air Flow’

Data blocks to be accessed are evenly distributed on the disk.  Errors due to disk defects are not
included.

(1)

Bit error rate after ECC processing

The error rate after ECC processing must be 10

-12 

or less.  An optical disk cartridge whose raw

error rate is 10

-4 

or less should be used.

(2)

Positioning error rate

The positioning error rate must be 10

-6 

or less. (with retry)

Ambient for
purity