Samsung BDH5900 ユーザーズマニュアル

1.  The Blu-ray player automatically verifies 

your wired network.

2.  After the player verifies the network, 

press the v button.

3.  Go to Step 6 on the left side of the 

page.

1.  The Blu-ray player automatically 

searches for and then lists all wireless 
networks that are within range.

2.  Select a network, and then press the v 

button. The keyboard appears.





3.  If your network has a password, use 

the keyboard to enter it. Press the 
number buttons on your remote to 
enter numbers. Use the keyboard to 
enter letters. If you want to display the 
password as you enter it, select Show 
Password on the right. When finished, 
use the ▲▼◀▶ buttons to select Done, 
and then press the v button. If you 

have no password, go to Step 4.

4.  After the player verifies the network, 

press the v button.

5.  Go to Step 6 on the left side of the page.

✎

 

■

The Home screen will not appear 

if you do not configure the initial 

settings except as noted below.

 

■

If you press the BLUE (d) button 

during network setup, you can 

access the Home screen even if the 

network setup is not completed yet.

 

■

When you return to the Home 

screen, the full screen mode is 

cancelled automatically.

 

■

If you want to display the Initial 

Setting screen again to make changes, 

press the ■ button on the front panel 

of the player for more than 5 seconds 

with no disc inserted. This resets the 

player to its default settings.

 

■

After the initial settings process is 

complete, you can operate the HDMI-

CEC function.

Settings

 

●

The Home screen will not appear if you 

do not configure the initial settings.

 

●

The OSD (On Screen Display) may 

change in this player after you 

upgrade the software version.

 

●

The access steps may differ depending 

on the menu you selected.

 

●

After the initial settings process is 

complete, you can then operate the 

panel buttons and remote control.

After you have connected the player to your 

TV, turn on the TV and player. When you turn 

on the player the first time, the player's Initial 

Settings screen appears on the TV. The Initial 

Setting procedure lets you set the On Screen 

Display (OSD) and menu languages, the 

aspect ratio (screen size), the network type, 

and connect the player to your network.
To run the Initial Settings procedure, follow

these steps:
1.  Plug in the Blu-ray player, turn on your 

TV, and then turn on the Blu-ray player by 
pressing the pOWER button on the remote. 

The Initial Settings Language screen appears.

2.  Select the desired language, and then press 

the v button. The Start screen appears.

3.  Press the v button. The TV Aspect 

screen appears. 

4.  On the TV Aspect screen, select the 

desired TV Aspect Ratio, and then press 

the v button. The Network screen 

appears.

✎

 

■

An explanation of each Aspect Ratio 

appears on the screen. Highlight each 

choice to see each explanation. If you 

have an HDTV, we suggest you choose 

16:9 original.

5.  If you have connected a LAN cable 

to the Blu-ray player, Initial Setup 

defaults to Wired Network. Go to 

Wired Network on the right side of the 

page. If you have not connected a LAN 

cable, Initial Setup defaults to Wireless 

Network. Go to Wireless Network on 

the right side of the page.

✎

 

■

If you have no network, select Skip by 

pressing the BLUE (d) button, and then 

go to Step 6.

6.  The Initial Settings Complete window 

appears and remains on the screen 

for a few moments. Then, the Home 

screen appears.