Sharp BD-HP25S ユーザーズマニュアル

Press 

ENTER, then enter the access point 

name.

•  The access point name is manually entered using 

the screen for inputting characters. (See page 49.)

Enter the access point name.

Access Point:

Next

Select “Next”, then press 

ENTER.

Press a/b to select your appropriate security 

key, then press 

ENTER.

•  When selecting WPA/WPA2, selectable security 

keys are PSK/TKIP and PSK/AES.

Select the security key.

OPEN

WEP

WPA-PSK(AES)

WPA-PSK(TKIP)

WPA2-PSK(AES)

WPA2-PSK(TKIP)

Press 

ENTER, then enter the security key code.

•  Enter the exact same security key which has been 

set in the wireless router.

•  The security key code is manually entered using the 

screen for inputting characters. (See page 49.)

Enter the security key.

Security key:

Next

Select “Next”, then press 

ENTER.

For testing after confirming the settings, select 

“Test”, then press 

ENTER.

•  If the test has failed, an error message appears. 

Retry to perform the settings after checking that the 

connection (page 19) is performed properly.

Confirm your setting.

Access Point:
Security key:

XXXXXXXXXXXX
XXXXXXXXXXXX

Test

Follow steps 5–11 of “When selecting Cable” 

on page 46 to complete the network connection 

settings.

A MAC address is a unique ID number for 

network equipment. A MAC address is necessary 

for MAC address filtering on the wireless router/

access point.

Before the wireless communication setup is 

performed, we recommend writing down the MAC 

address of the connected wireless LAN adapter 

and keeping it in a safe place. The MAC address 

is labeled on the adapter. (The MAC address 

is displayed on the “Setting the info. of the 

Ethernet” screen when wireless communication is 

set (See step 4 of page 47).)

MAC address