Sharp BD-HP20H ユーザーズマニュアル

•  3 types of remote control codes operate this Player: 

RC-1, RC-2 and RC-3. If you operate this Player 
by remote control along with another SHARP 
Blu-ray Disc Player or DVD Player placed next to it 
simultaneously, switching the remote control code 
(both the Player and remote control) to one of the 
signals (RC-1, RC-2 or RC-3) will let you operate 
only with this Player.

•  Make sure to set the Player and remote control to 

the same remote code. You can not operate the 
Player if they are not set to the same code.

 Setting the code to “RC-3”.

Press and hold 3 fi rst and then 

B 

on the remote control together for 
more than 5 seconds.

Press 

B to turn off the player.

Point the remote control at the 
player, then press and hold the 
DISPLAY button.

• TV Power: 

B

•  TV Channel up/down: P 

r / s

•  TV Volume up/down: 

i 

e/f

• TV-AV Selector: 

b

The Universal Remote Control may operate the 
basic functions of the TV of SHARP.

Approx. 2 sec. later

Approx. 3 sec. later

B

 (POWER)

Firstly, press 

B to turn on this player.

Press 

B on the remote control and check the 

front panel display (RC-1, RC-2 or RC-3).
Set the remote control code according to the 
display and press 

B to see if you can turn 

on/off the Player.

 Change “RC-1” to “RC-3”.

Remote control sensor

 

The display on the player changes 
as shown below, and the player will 
be set to the same number as the 
remote control.