Sharp BD-HP75U ユーザーズマニュアル

You can display the audio information on the disc 

currently being played back by pressing 

AUDIO.

The displayed contents vary depending on the disc.

The audio channel currently being played back will 

be displayed.

If multiple audio channels are recorded, you can 

switch the audio channel by pressing 

AUDIO.

“Stereo” is displayed. (Audio cannot be switched.)

•  When you play a program recorded in stereo or 

monaural, and if you are listening to the Bitstream 

sound via the digital output jack, you cannot select the 

audio channel. Set “Audio Out” to “PCM” (page 42).

•  Settings for audio can also be changed in the Function 

Control screen (Page 38).

•  The operation of audio differs according to each disc. 

You may need to refer to the operation manual of the 

disc.

•  The display for audio information automatically 

disappears after 5 seconds.

If subtitles are provided in multiple languages, you 

can switch between them.

Press 

SUBTITLE during playback.

•  The display indicates the subtitle number currently 

being played back, and the subtitles appear.

Each time 

SUBTITLE is pressed, the subtitles change.

•  “–” is displayed if a disc has no subtitles.

•  You can also select “Off”.

•  Settings for subtitles can also be changed in the 

Function Control screen (Page 38).

•  The operation of subtitles differs according to each disc. 

You may need to refer to the operation manual of the 

disc.

•  The display for subtitle information automatically 

disappears after 5 seconds.

If multiple angles are recorded, you can switch 

between them.

Press 

ANGLE during playback.

•  The display indicates the angle number currently being 

played back. Each time you press 

ANGLE, the angle 

switches.

•  “–” is displayed if a disc is recorded with only one angle.

1

To return to the previous angle, press 

ANGLE to 

cycle through the angles until you return to the 

original angle.

•  The displayed items vary depending on the disc.

•  If you access the Function Control screen during 

playback of a BD/DVD video, it may be impossible to 

operate the BD/DVD video playback. In cases like this, 

close the Function Control screen.

•  The operation of angles differs according to each disc. 

You may need to refer to the operation manual of the 

disc.

•  The display for angle information automatically 

disappears after 5 seconds.

You can change settings so that Angle Mark appears 

in the right bottom part of the screen when multiple 

angles are recorded. The settings can be changed 

in “Settings” – “Playback Setting” – “Angle Mark 

Display” (Page 44).