Sharp BD-HP75U ユーザーズマニュアル

Press 

ENTER, then enter the access point 

name.

•  The access point name is manually entered using 

the screen for inputting characters. (See page 49.)

Enter the access point name.

Access Point:

Next

Select “Next”, then press 

ENTER.

Press a/b to select your appropriate security 

key, then press 

ENTER.

•  When selecting WPA/WPA2, selectable security 

keys are PSK/TKIP and PSK/AES.

Select the security key.

OPEN

WEP

WPA-PSK(AES)

WPA-PSK(TKIP)

WPA2-PSK(AES)

WPA2-PSK(TKIP)

Press 

ENTER, then enter the security key code.

•  Enter the exact same security key which has been 

set in the wireless router.

•  The security key code is manually entered using the 

screen for inputting characters. (See page 49.)

Enter the security key.

Security key:

Next

Select “Next”, then press 

ENTER.

For testing after confirming the settings, select 

“Test”, then press 

ENTER.

•  If the test has failed, an error message appears. 

Retry to perform the settings after checking that the 

connection (page 19) is performed properly.

Confirm your setting.

Access Point:
Security key:

XXXXXXXXXXXX
XXXXXXXXXXXX

Test

Follow steps 5–11 of “When selecting Cable” 

on page 46 to complete the network connection 

settings.

A MAC address is a unique ID number for 

network equipment. A MAC address is necessary 

for MAC address filtering on the wireless router/

access point.

Before the wireless communication setup is 

performed, we recommend writing down the MAC 

address of the connected wireless LAN adapter 

and keeping it in a safe place. The MAC address 

is labeled on the adapter. (The MAC address is 

displayed on the “Current Ethernet setup info.” 

screen when wireless communication is set (See 

step 4 of page 47).)

MAC address