Sharp BD-HP75U ユーザーズマニュアル

•  Only USB memory devices formatted with FAT 32/16 are 

compatible.

When formatting a USB memory device using a PC, 

perform the following settings.

Format File System: FAT32

Allocation Unit Size: Default Allocation Size

•  Do not extract the firmware update file to any folders 

other than the root directory on the USB memory 

device. The firmware update file must be only one file 

directly in the root directory.

•  Do not remove the USB memory device or unplug the 

AC cord while the software is being updated.

When you insert or remove a USB memory device, 

be sure to turn the main power off and make sure 

that “Quick Start” is set to “No” (See page 43).

Insert the USB memory device with the update 

file into the USB1 or USB2 terminal on this 

player.

•  It is recommended that the USB memory device be 

connected to the USB2 terminal on the front of the 

player.

•  A USB memory device can be used with either the 

USB1 or USB2 terminal. When two USB memory 

devices are connected to both terminals at the same 

time, in certain situations the USB1 terminal may give 

priority to Local Storage and the USB1 terminal cannot 

be used for Software Update.

USB memory device

Press 

POWER to turn on the power.

Press a/b to select “Settings”, then press d or 

ENTER.

Press a/b to select “Software Update 

Settings”, then press d or ENTER.

Press a/b to select “Manual Update”, then 

press d or ENTER.

Press a/b to select “USB Memory”, then press 

ENTER.

•  If you have not yet set the password, go to step 7.

Enter the 4-digit number using 0–9.

Enter 4-digit password

Press 

ENTER to start checking data in the USB 

memory device.

Insert USB memory device containing

the software update file.

OK

During the data checking, “Checking” blinks.

Now checking the data in USB memory device.

Checking

•  The current version of this unit software and the 

version of the update file on the USB memory 

device are displayed. To update this player software 

with update file, select “Yes”, and press 

ENTER.

Software update file is detected in the USB memory device.

Start update?

Current Ver. :
Update Ver. :

xxxxxxxxxx

yyyyyyyyyy

Yes

No

(Continued on the next page)