Sharp BD-AMS10U ユーザーズマニュアル

• This player can be controlled from a PC using the 

IP.

• Use an ETHERNET cable (commercially available) 

or wireless LAN USB adapter for the connections. 

•  This operation system should be used by a person who 

is accustomed to using computers.

Connect to the player with the following settings 

made for IP on the PC.

TCP/IP

Set the IP address on the player 

menu

None (Do not select Telnet or 

SSH)

Set a port number on the player 

menu 

When you set your ID and password on the player 

menu, you need to enter them as soon as you 

connect to the player.

•  The connection will be cut off when there has been no 

communication for 3 minutes.

Press c/d to select “Settings”, then press b or 

ENTER.

Press c/d to select “Communication Setup”, 

then press b or ENTER.

Press a/b to select “IP Control Setup”, then 

press 

ENTER.

Press a/b to select “Change”, then press 

ENTER.

To use IP Control, select “Enable”, then press 

ENTER.

Set the device name.

Set your login ID and password.

Set the port to use with IP Control.

Confirm the settings, then press “OK”.

Send the control commands from the PC via the IP.

This Player operates according to the received 

command and sends a response message to the 

PC.

Do not send multiple commands at the same time. 

Wait until the PC receives the OK response before 

sending the next command.

Make sure to send “A” with the carriage return and 

confirm that “ERR” returns before operating.

Eight ASCII codes e CR

C1  C2  C3  C4  P1  P2  P3  P4

Command 

4-digits

Parameter 

4-digits

Return code

Command 4-digits: Command. The text of four 

characters.

Parameter 4-digits: Parameter 0 – 9, blank

Input the parameter values, aligning left, and fill with 

blank(s) for the remainder. (Be sure that four values 

are input for the parameter.)

When the input parameter is not within an adjustable 

range, “ERR” returns. (Refer to “Response code 

format”.)

Normal response

O

K

Return code (0DH)

Problem response (communication error or 

incorrect command)

E

R

R

Return code (0DH)

Appendix