Sharp BD-HP21U ユーザーズマニュアル

p

First, press POWER to turn on this player.
Press POWER on the remote control and 
check the front panel display (RC-1, RC-2 or 
RC-3).
Set the remote control code according to the 
display and press POWER to see if you can 
turn on/off the Player.

The Universal Remote Control may operate the 
basic functions of the SHARP TV.

TV Power: POWER
TV Channel up/down: CH 

r/s

TV Volume up/down: VOL 

e/f

TV-AV Selector: INPUT

•
•
•
•

3 types of remote control codes operate this 
Player: RC-1, RC-2 and RC-3. If you operate 
this Player by remote control along with another 
SHARP Blu-ray Disc Player or DVD Player placed 
next to it simultaneously, switching the remote 
control code (both the Player and remote control) 
to one of the signals (RC-1, RC-2 or RC-3) will let 
you operate only with this Player.
Make sure to set the Player and remote control to 
the same remote code. You can not operate the 
Player if they are not set to the same code.

Example: Setting the code to “RC-3”.

Press and hold 3 first and then 
POWER on the remote control 
together for more than 5 seconds.

Press POWER to turn off the player.

Point the remote control at the 
player, then press and hold the 
DISPLAY button.

The display on the player changes 
as shown below, and the player will 
be set to the same number as the 
remote control.

Example: Change “RC-1” to “RC-3”.

Approx. 2 sec. later

Approx. 3 sec. later

•

•

POWER

Remote control sensor

BD-HP21U_en.indd   21

BD-HP21U_en.indd   21

2008/07/17   19:43:49

2008/07/17   19:43:49