OPPO Digital BDP-93 ユーザーズマニュアル

The OPPO BDP-93 Blu-Ray Disc Player features an IR IN port on its back panel.  If the player is to be 
installed in an equipment cabinet where direct line-of-sight is not available for remote control, your custom 
home theater installer can purchase an external IR Remote Sensor and plug it into the IR IN port.  Place the 
sensor head at a location where there is direct line-of-sight to ensure reliable operation.  

3.5mm Mono Cable

Rear Panel

External IR Remote Sensor

 

•  When an external IR sensor is plugged in, the original IR sensor window on the front 

panel will be disabled. 

•  OPPO cannot guarantee that the IR IN port will be compatible with devices that are 

not manufactured by OPPO.  

•  The IR port on the BDP-93 is NOT compatible with the prior external IR Remote 

Sensor (IR-ES1) which is used with BDP-83.   

•  Connecting the IR IN port to an incompatible device may result in damage to the 

connected device or the player.  

•  Please contact OPPO customer support if you plan to integrate the player into an IR 

distribution system. Customer support can provide recommendations on how to 
properly connect the control signals.   

IR IN Signal Identifications

Tip: IR carrier signal
Sleeve: Ground

3.5mm Mono Plug

 

 

The BDP-93 has an RS232 control port and can be integrated into most custom home theater control systems.  
Please ask your custom installer to contact OPPO for the RS232 control protocol.