OPPO Digital BDP-80 ユーザーズマニュアル

P/N

 

While you may want to set the video output system (NTSC/PAL) to the same 
as that supported by your TV, realize that the OPPO Blu-ray Disc Player will 
convert any content that is not in the correct format your TV understands.  The 
default output is NTSC for North America.  

Press and hold the P/N button for 5 seconds on the remote control to cycle the 
video output to PAL, NTSC or “Multi” system.  The TV screen displays the 
selected system name. 

Some points to keep in mind: 

•  When the video output is set to PAL or NTSC system, the player will convert the disc content to 

the selected system. 

•  When the video output is set to “Multi”, the player will not perform system conversion.  The 

“Multi” mode is only to be used if your TV supports both NTSC and PAL systems.  

•  Most TV sets only support one of the NTSC or PAL systems.  If the wrong output is selected, 

the TV may not display a picture.  In this case repeatedly press the P/N button until a supported 
system is selected.  

•  The output system selected with the P/N button will be remembered when the player is turned 

off.  The output system selection can also be done by setting the “TV System” item in the 
“Video Setup” section of the player’s Setup Menu. (Refer to page 46 for details.) 

 

RESOLUTION

 

The OPPO BDP-80 Blu-ray Disc Player supports multiple output 
resolutions.  For detailed discussion on how to choose the best output 
resolution, please refer to the Select the Best Output Resolution section 
on page 19 of this manual. 

If you would like to change the output resolution, you may do so by 
pressing the RESOLUTION button on the remote control:  

1.  Make sure the video cable is properly connected. 
2.  Turn on the TV.  Adjust the TV to use the proper input (HDMI, DVI or Component). 
3.  Make sure that the player is turned on.  Although the output resolution can be changed “on the 

fly”, it is recommended that you stop playback and take out the disc before changing the output 
resolution.  Press the RESOLUTION button.  A “Resolution Setting” menu appears on the TV 
screen.  In case the TV does not support the current resolution and you cannot see the 
“Resolution Setting” menu, the current resolution is also displayed on the front panel. 

4. Use 

the 

 buttons to select the new output resolution.  You may also press 

the RESOLUTION button multiple times to cycle through the available output resolutions.  The 
new resolution is displayed on the front panel just in case you cannot see the “Resolution 
Setting” menu. 

5. Press 

the 

 button to apply the selected output resolution.  Or, if you do not want to 

change the output resolution, press the RETURN button to exit.