Sharp BD-HP90S ユーザーズマニュアル

This allows you to perform and/or change the 
communication settings and select the type of 
Internet connection from Cable or Wireless (built-in). 
This setting is required to use BD-LIVE functions and 
software updates that connect to the Internet.

When a LAN cable is connected to this player, a wireless 
LAN connection is not available. To use wireless LAN, do 
not connect a LAN cable to this player.

•

For manually performing the setting, the following 
information of the connected router or modem is required. 
Confirm the information prior to the setting.

IP address, netmask, gateway, DNS address

•

−

Make sure that the LAN cable is connected to this player 
if a wired Internet connection is made (See page 22). This 
setting cannot be performed when a LAN cable is not 
connected.

•

Press 

HOME to display the menu screen.

Press 

a/b to select “Settings”, then press d or 

ENTER.

Press 

a/b to select “Communication Setup”, 

then press 

d or ENTER.

Press 

a/b to select “Ethernet Setup (Cable)”, 

then press 

d or ENTER.

Press 

a/b to select “Change”, then press 

ENTER.

Setting the info. of the Ethernet
[Current Setup]

: Auto Setup
: Auto Setup
: Auto Setup
: Auto Setup

IP Address
Netmask
Gateway
DNS

Change

Initialize

For initializing the current setting, select “Initialize”, 
then press 

ENTER.

•

For setting the IP address, press 

c/d to select 

“Yes” or “No”, then press 

ENTER.

Do you obtain the IP address
automatically?

IP Address

Netmask

Gateway

Next

Yes

No

If selecting “Yes”: The IP address is automatically 
obtained.
If selecting “No”: The IP address, netmask and 
gateway are manually entered using the screen for 
inputting characters. (See page 48.)
Regarding each of the setup values, confirm the 
specifications of your broadband router.

Select “Next”, then press 

ENTER.

If selecting “Yes” in the step 6, go to the step 9.

Enter your DNS address.

Enter your DNS address.

Primary

Secondary

Next

The primary and secondary DNS addresses are 
entered using the screen for inputting characters. (See 
page 48.)
Regarding each of the setup values, confirm the 
specifications of your broadband router.

Select “Next”, then press 

ENTER.

For testing the connection to the Internet, after 
confirming the settings, press 

a/b to select 

“Test”, then press 

ENTER.

“Test” is available only when setting to obtain the IP 
address automatically. “Test” cannot be selected if the 
IP address has not been obtained automatically.

Confirm the current setting.

: xxx xxx xxx xxx
: xxx xxx xxx xxx
: xxx xxx xxx xxx
: xxx xxx xxx xxx
  xxx xxx xxx xxx
: xx xx xx xx xx xx

IP Address
Netmask
Gateway
DNS Address

MAC Address

Test

Complete

As a result of the test, if the Internet connection fails, 
enter the setup values manually.

Press 

a/b to select “Complete”, then press 

ENTER.

•

•

•

•

•

•