Sharp TINSEA548WJQZ ユーザーズマニュアル

If multiple angles are recorded, you can switch 
between them.

Press ANGLE during playback.

The display indicates the angle number currently being 
played back. Each time you press ANGLE, the angle 
switches.
“–” is displayed if a disc is recorded with only one angle.

1

To return to the previous angle, press ANGLE to cycle 
through the angles until you return to the original angle.

The displayed items vary depending on the disc.
If you access the Function Control screen during playback 
of a BD/DVD video, it may be impossible to operate the 
BD/DVD video playback. In cases like this, close the 
Function Control screen.
The operation of angles differs according to each disc. You 
may need to refer to the operation manual of the disc.
The display for angle information automatically disappears 
after 5 seconds.

•
•

•

•

•

•

You can change settings so that Angle Mark appears 
in the right bottom part of the screen when multiple 
angles are recorded. The settings can be changed in 
“Settings” – “Playback Setting” – “Angle Mark Display” 
(Page 51).