Sharp TINSEA548WJQZ ユーザーズマニュアル

For setting the proxy server, press 

c/d to 

select “Yes” or “No”, then press ENTER.

Do you use the proxy server?

Address

Port

Next

Yes

No

If selecting “Yes”: The IP address or proxy server 
name and port number for the proxy server specified 
from your Internet service provider are entered using 
the screen for inputting characters. (See page 56.)
If selecting “No”: Go to the next step.

Select “Next”, then press ENTER.

For the advanced setting (the setting of the 
Ethernet connection speeds), press 

a/b to 

select “Yes” or “No”, then press ENTER.

Normally select “No”, then press ENTER.
The Ethernet connection speeds can be set when you 
select “Yes”, then press ENTER.
As automatic detection is made (factory preset 
mode), this setting is not normally necessary. If a 
situation occurs in which the Ethernet connection fails, 
etc., change the setting and confirm if the Ethernet 
connection successfully works.
When the connection speed is set, select “Next”, then 
press ENTER.

Option
Ethernet Connection Speeds

Next

Auto-Detection

10M Half Duplex

100M Half Duplex

10M Full Duplex

100M Full Duplex

For testing the connection to the Internet, after 
confirming the settings, press 

a/b to select 

“Test”, then press ENTER.

“Test” is available only when setting to obtain the IP 
address automatically. “Test” cannot be selected if the 
IP address has not been obtained automatically.

Confirm the current setting.

: xxx xxx xxx xxx
: xxx xxx xxx xxx
: xxx xxx xxx xxx
: xxx xxx xxx xxx
  xxx xxx xxx xxx
: xx xx xx xx xx xx

IP Address
Netmask
Gateway
DNS Address

MAC Address

Test

Complete

As a result of the test, if the Internet connection fails, 
enter the setup values manually.

Press 

a/b to select “Complete”, then press 

.

•

•

•
•

•

•

•

We recommend writing down the MAC address of the 
connected wireless LAN adapter in this operation manual 
(page 55) and keeping it in a safe place. The MAC address 
is labeled on the adapter or displayed on the “Current 
Ethernet setup info.” screen (See step 5 below).
When performing the wireless communication setup, 
security information for the wireless router/access point 
(WEP, WPA or WPA2 key) is required. Check your wireless 
router/access point’s information prior to setup.

•

•

Wireless communication setup cannot be performed when 
the wireless LAN adapter is not inserted.
Before this player can access the Internet wirelessly, setup 
of a wireless router/access point is required.

•

•

Press HOME to display the menu screen.

Press 

a/b to select “Settings”, then press d or 

.

Press 

a/b to select “Communication Setup”, 

then press 

d or ENTER.

Press 

a/b to select “Ethernet Setup 

(Wireless)”, then press 

d or ENTER.

Press 

a/b to select “Change”, then press 

.

Current Ethernet setup info.

: xx xx xx xx xx xx
: Not Selected
: Auto Setup
: Auto Setup
: Auto Setup
: Auto Setup
: Not Use

MAC Address
Access Point
IP Address
Netmask
Gateway
DNS
Proxy

Change

Initialize

For initializing the current setting, select “Initialize”, 
then press ENTER. 

The player scans all of the available access 
points and displays the points with the “Other 
Network” selection bar on the screen.

During searching access point(s), “Accessing...” 
appears on the screen.
Up to 6 items (5 access points and the “Other 
Network” selection bar) are displayed on the screen.
When there are six or more items retrieved, display 
the next screen by selecting “Next”, then pressing 
ENTER. (The “Other Network” selection bar is always 
displayed last.) When no available access points are 
retrieved, only the “Other Network” selection bar is 
displayed on the screen.

•

•

•

•