Sharp TINSEA548WJQZ ユーザーズマニュアル

During the data checking, “Checking” blinks.

Now checking the data in USB memory device.

Checking

The current version of this unit software and the 
version of the update file on the USB memory device 
are displayed. To update this player software with 
update file, select “Yes”, and press ENTER.

Software update file is detected in the USB memory device.
Start update?

Current Ver. :
Update Ver. :

xxxxxxxxxx
yyyyyyyyyy

Yes

No

If the USB memory device is not properly installed or 
the correct update file cannot be found on the USB 
memory device, an error message is displayed.
Check the file on the USB memory device, and then 
reinsert the USB memory device correctly.

Software update file is not detected in the USB memory device.
Confirm that you have transferred the file 
to the USB memory device and retry software update.
Confirm that you have inserted the USB memory device
into the correct device.

OK

There is more than one software file 
in the USB memory device.
Confirm that only the software update file is 
in the USB memory device.

OK

Press ENTER to start updating.

The screen becomes dark for a while until the update 
screen can be displayed. Please wait for the update 
screen to appear. Do not unplug the AC cord.

The picture will temporarily go dark until 
the software update display appears.
Wait several minutes and do not unplug the AC cord.

OK

Now updating

Do not unplug AC cord.

Update Version

*

30%

yyyyyyyyyy

•

•

•

When the software is successfully updated, a 
screen is displayed indicating that the update 
process is completed.

If the update has failed, check the file in the USB 
device and try Software Update again.

Press POWER to turn off the player.

Remove the USB memory device.

Delete unneeded software update data using a PC 
after the software update process is completed.

•

•