Sharp BDHP75U ユーザーズマニュアル

Using the HDMI CEC (Consumer Electronics 

Control), with AQUOS LINK you can interactively 

operate this player with your SHARP AQUOS TV.

When you connect this player to the LCD TV 

compatible with AQUOS LINK using an HDMI cable, 

you can perform the functions listed below. (See 

page 16 for connecting to the HDMI terminal).

E

When you start playback of this player, the input 

selector of the LCD TV will automatically switch to 

the LCD TV input terminal connected to the player 

and the playback image will appear on the screen, 

even if you are watching a TV program.

E

If you turn off the LCD TV when this player is in stop 

mode, the power of this player will be turned off 

automatically. (However, when playing back a disc 

or other content using this player, the power does 

not turn off.)

E

When you switch to the LCD TV input terminal 

connected to this player, the power of this player will 

be turned on automatically.

E

When you connect this player to an AQUOS LCD 

TV compatible with AQUOS LINK and set “AQUOS 

LINK” to “Yes” (page 43), images automatically 

adjusted to the most suitable image quality for the 

AQUOS TV are output from the HDMI OUT terminal 

of this player.

•  In order to make AQUOS LINK available, set “AQUOS 

LINK” to “Yes” (See page 43).

Refer to the Operation Manual of the TV for details 

regarding setup.

This sets output of 3D images.

To view 3D images, playback of 3D content (3D BD 

video) is necessary with a 3D compatible TV and 3D 

glasses in addition to this player.

Press 

3D to change to the 3D mode.

•  Each time the button is pressed, the mode switches 

between “Auto(3D)” and “2D”.

•  The status of the selected mode will be displayed on the 

TV screen.

Auto: Video signals are output as 3D when 3D content (3D 

BD video) is played or as 2D when 2D content is played.

2D: Even if 3D content (3D BD video) is played, video 

signals are output as 2D at all times.

•  This setting (Auto(3D)/2D) can also be performed using 

the menu screen (See page 45).

•  The 3D mode can be switched only when playback is 

stopped.

•  Depending on the connected TV, the images during 

playback may switch to 2D images due to changes in 

the resolution, etc. Make sure the 3D image setting is 

performed on the TV.

•  The 3D images may not be output as set in “HDMI 

Video Out”.

•  When performing Fast Forward/Reverse, images are 

shown in 2D.

•  When viewing 3D images, viewing for a long period 

of time or lying on your back may cause eye strain 

and discomfort. In addition, 3D images may affect the 

eyesight of young children/infants, so keep them from 

viewing the images.