Panasonic KX-TVP200 ユーザーズマニュアル
4.3 CONNECTING THE VPS WITH THE PANASONIC KX-TD816, KX-TD1232 AND KX-TD612
94
Installation Manual
B. Programming based on Windows Application
1.
Select File -> New/Open (BATCH Mode) or Connect -> DSHS Connect/Disconnect
(INTERACTIVE Mode).
(INTERACTIVE Mode).
Note
When you select INTERACTIVE Mode, connect the RS232-c cable between your PC and
the TD1232 unit.
the TD1232 unit.
2.
Select System -> Voice Mail -> Voice Mail Ports, and set the Voice mail Jack No. into
the "Jack" column of Odd Port No. as below, and press OK.
the "Jack" column of Odd Port No. as below, and press OK.
The required programming is now complete and the VPS and KX-TD1232 should be able
to communicate through DPT Integration.
to communicate through DPT Integration.
We recommend that the KX-TD1232 system has any optional extension cards installed
and telephones connected before starting the VPS.
and telephones connected before starting the VPS.
When running the Quick Setup command (Section 5 CUSTOMISING THE SYSTEM) from
the VPS, the PBX transmits the extension information automatically. This saves time when
programming the VPS.
the VPS, the PBX transmits the extension information automatically. This saves time when
programming the VPS.