Shiro SC3126 ユーザーズマニュアル
SC3126 User Guide
6
constant noise.
ALARM CLOCK
LCD display
SET 7 ALERT, press SET key to enter this mode. LCD
display
1 00-00 OFF. Press SET to navigate on the HOUR/MINUTE. Use
the
UP/- or DOWN/+ key to change the values. Change OFF to ON to
enable the alarm function. You can set 3 alarms and the telephone will
ring at the time set.
4. FUNCTION KEY OPERATION
UP/- and DOWN/+ key
In any mode, press either
key to check all the incoming numbers. If there is no incoming
number, the unit will display
END. The unit can receive up to 16-digit phone numbers.
OUT key
In any mode, press
OUT key to check the outgoing numbers with time. Use UP/- or DOWN/+
key to select the outgoing number. Press
CALLBACK key to dial the selected number.
DELETE key
In any mode, when checking the incoming and outgoing call, press
DELETE key to delete the
number you are checking. Press and hold
DELETE key for 4 seconds and it will delete all
incoming call or outgoing call numbers. When you pre-dial, press
DELETE key to delete one
digit one by one. When you enter IP number or password, use
DELETE key to delete error
digit.
CALLBACK key
In the off-hook mode, press this key to redial the last dialed number. In the on-hook mode,
pre-dial the number then press
CALLBACK key to auto pick up and dial out the number.
When checking the incoming number or outgoing number, press
CALLBACK key to auto pick
up and dial out the number directly.
CAL key
You can use the calculator function to perform addition, subtraction, multiplication and
division. Press the
CAL key to go into calculator mode. Press the first number follow by UP/-
(minus)/
DOWN/+ (plus)/ OUT/x (multiply)/ BRIGHT/
÷÷÷÷
(divide) key and the second number.
Press
#/= (result) key to see the calculated value. To reset the values, press CAL key again.
If you need to insert decimal point, press the
*/. key. The LCD can only display result up to 10
digits. To exit this mode, press
DEL key.
FLASH key (600ms)
In the off-hook mode, press this key to auto-hang up for 600ms, after that you can press
REDIAL key or dial out another number.