Lucent Technologies 555-670-111 ユーザーズマニュアル
MERLIN LEGEND Communications System Release 7.0
System Programming
System Programming
555-670-111
Issue 1
April 1999
Programming Basics
1-55
Idle States
1
Figure 1-12.
System Busy Screen
The screen changes to the appropriate programming screen when the system is
no longer busy.
no longer busy.
System Forced Idle
1
When the entire system is forced idle, no calls can be made or received. The
following procedures can be performed only when the entire system (every line
and every extension) is idle:
following procedures can be performed only when the entire system (every line
and every extension) is idle:
■
Select system mode
■
Identify system operator positions
■
Renumber system
■
Renumber boards
■
Identify extensions with voice signal pairs for the Voice Announce to Busy
feature
feature
■
Identify extensions that need voice and data features
■
Restore system programming information
■
Identify the Music-On-Hold jack
When the system is forced idle, the following occurs: Multiline telephone users
hear a signal, indicating that the telephone cannot be used; display telephone
users see the message
hear a signal, indicating that the telephone cannot be used; display telephone
users see the message
Wait:
System
Busy
; single-line telephone users do not
hear a dial tone.
Line or Trunk Idle
1
Because these procedures require the line or trunk to be idle
only at the instant of
programming, the line or trunk is not forced idle (as described in the previous
System Busy Pls Wait
Dial Code
:nnnn S/P:ss/pp
nnnn
= a previously entered extension
ss/pp
= the slot and port number of the
busy extension
Exit Enter