Toshiba BDX3000KU ユーザーズマニュアル

•  Limit Access — Allows Internet access with valid “BD-

Live” network access approval.

•  Always Allow Access — Always allows BD-Live Internet 

access.

•  Prohibit Access — Never allows BD-Live Internet 

access.

In order to set the player up for BD-Live Internet Access, 
perform the following steps:

1.  In the main menu of Settings, press   button, then use 

 /   to select BD-Live, then press OK.

2. Press   /   to select “BD-Live Internet Access”, and 

then press OK.

3. Use   /   to select the desired setting, and then press 

OK to confi rm.

4.  Make sure that “Limit Access” or “Always Allow 

Access” is checked.

5.  Once the USB device or SD card has been inserted, if 

there is not at least 100Mbyte of free space on the device, 
you should choose “Erase Blu-ray Storage” from the 
BD-Live setup menu.

6. Press  to return to the main menu of Settings,  then 

use   /   to highlight Network, and then press OK. (For 
details, please refer to “Network Connection Setting” on 
Page 36.)

Notes:
•  Depending on your connection environment, it may take 

time to connect to the Internet or the Internet may not be 
connected.

•  When BD-Live function are used and the unit is 

connected to the Internet, you may be charged for this 
communication.

•  Do not remove the USB device or SD card when using 

the BD-Live function.

This option is used to tell the BD player whether or not to 
use an inserted SD card or USB device to store BD-Live 
content (movie trailers, additional scenes, etc.).

In order to add BD-Live memory for BD-Live Internet Access, 
insert an USB device or SD card (1GB is recommended) 
into the USB slot or SD card slot on the player.

If you choose OK to erase Blu-ray storage, all bookmarks 
and BD-Live content saved in memory are deleted.

1.  In the main menu of Settings, press   button to select 

Display, and then press OK to confi rm.

2. Press   /   to select an option, and then press OK.

3. Use   /   to select the desired option, and then press 

OK to confi rm your selection.

4. Press   to go to the previous menu.

Display

HDMI Status                        Connected

HDMI Preferred Format      1080p

Resolution                           HDMI Auto

TV Aspect                           16:9 Pillarbox

Film Mode                           Off

Deep Color                          On

Bluray 3D Mode                  Automatic

This option displays the HDMI status. If an HDMI TV is 
connected,  Connected appears. If an HDMI TV is not 
connected, Disconnected appears. 

This option shows the best HDMI format for the connected 
TV.

You can defi ne the video output resolution in this option. In 
case that the menu of “Resolution” setting disappears, make 
composite video (yellow) connection to restore it, then select 
the resolution which is compatible with the connected TV.

Selecting a resolution the TV does not support could 

• 

result in an unstable picture or loss of the picture. See 
the documentation that came with the TV to fi nd the 
resolutions the TV supports.

Only the HDMI output on your player supports 1080p 

• 

video output at any frame rate. If the TV is connected 
to the component output, the video output is limited to 
1080i or lower.