Toshiba BDX5400 ユーザーズマニュアル

English

15

This section describes the various setting option of 

this Blu-ray Disc

TM

 player. 

If the setup option is greyed out, it means the 

setting cannot be changed at the current state.

1. In Setting menu, use  /  to select System 

and press OK.

2. Use  /  to select an option and press OK.

3. Press   or the RETURN button to return to the 

previous menu.

1. Press the SETTING button in stop mode to 

display the setup screen. 

2. Press OK to enter the Setting menu.

3. Use  /  to select an option and press OK.

4. Press   or the RETURN button to return to the 

previous menu.

When you connect an audio system to the COAXIAL 

DIGITAL output jack, the options are:
{Bitstream} -  Selects Bitstream output if your 

receiver SPDIF (Coaxial) IN supports Dolby or DTS 

or PCM audio signal.
{PCM} -  Selects PCM output if your receiver 

SPDIF (Coaxial) IN only supports PCM stereo audio 

signal.
{Re-encode} - Selects Re-encode output if your 

receiver SPDIF (Coaxial) IN supports Dolby or DTS 

and you want to hear both PIP audio and the movie 

audio on Blu-ray™ video.
{Off} - No audio will be output via COAXIAL 

DIGITAL output jack.

1. In Setting menu, use  /  to select Audio and 

press OK.

2. Press  /  to select an option and press OK.

3. Use  /  to select the desired audio setting and 

press OK.

4. Press   or the RETURN button to return to the 

previous menu.

Select the digital audio signal sampling frequency. 

(Only Coaxial) 

{48k} - For discs recorded at sampling rate of 48 

kHz.

{96k} - For discs recorded at sampling rate of 96 

kHz. 

{192k} - For discs recorded at sampling rate of 

192 kHz.

When you connected a HDMI device to the HDMI 

OUT jack, the available options are:
{Bitstream} - Selects Bitstream output if your 

receiver HDMI IN supports Dolby or DTS or PCM 

audio signal.
{PCM} - Selects PCM output if your receiver HDMI 

IN only supports PCM audio signal.
{Re-encode} - Selects Re-encode if your 

receiver’s HDMI IN supports Dolby or DTS and you 

want to hear both PIP audio and movie audio on 

Blu-ray™ video.
{Off} - No audio will be output via HDMI OUT 

jack.

Select whether to downmix the multi-channel audio 

into fewer channels.

Select the Dynamic Range Control mode which 

makes it available to listen to a movie at a low 

volume without losing sound clarity.

{Off} - Non-dynamic range compress. 

{On} - Dynamic range compress.

{Auto} - Adjust the DRC according to input 

audio.

The setting of Auto is effective for Dolby TrueHD.

{Stereo} - Downmixes the multi-channel audio 

into two channel stereo. Choose when the Blu-ray 

Disc™ player is connected to equipment that does 

not support virtual surround function such as Dolby 

Pro Logic.

{Surround Encoded (Lt/Rt)} - Downmixes 

the multichannel audio into surround compatible 

stereo. Choose when the Blu-ray Disc™ player 

is connected to equipment that supports virtual 

surround function such as Dolby Pro Logic.