Toshiba BDX1200KU ユーザーズマニュアル

1

E

ng

lis

h

   

This section describes the various setting

option of this Blu-ray Disc™ player. 

If the setup option is grayed out, it means

the setting cannot be changed at the

current state.

1. Press SETUP button on the remote

control. The Setup Menu appears.

Screen Saver

On
On

On
More...
More...

Disc Auto Playback

CEC

Load Default

Upgrade

SETUP

Exit

Move cursor key to select menu option 
then use “OK” key to select 

2. Press  to select an option, then press

 to access.

3. Press / to select a setup option and

press .

4

. Select the setting you wish to change

and press OK to confirm.

- Press  to return to the previous menu.

To change the following system option to 

personalize your Blu-ray Disc™ player

.

•  [Screen Saver]

Turn On or Off the screen saver mode.

It helps to protect the TV screen.

{ On } – Set the screen saver active 

after approximately 5 minutes with no 

operation. You can turn off the screen 

saver by pressing the SETUP button.

- The Blu-ray Disc™ Player will switch to 

standby mode if there is no operation 

after the screen saver is engaged for 

approximately 15 minutes. 

{ Off } – Turn off the screen saver 

mode.

•  [Disc Auto Playback]

Turn On or Off the disc automatic 

playback switching mode.

{On} – The disc playback automatically 

after loading.

{Off} – Turn off disc auto playback 

mode.

•  [CEC]

This player supports REGZA-LINK which 

uses the HDMI®-CEC (Consumer 

Electronics Control) protocol. You can 

use one single remote control to control 

all REGZA-LINK-compliant devices that 

are connected through HDMI 

connectors.

{On} - Turns on REGZA-LINK features.

- With CEC on, during TV standby with 

the Blu-ray

 

Disc™ Player on, pressing 

SETUP, PLAY/PAUSE will  power on the 

TV. When you turn the TV off, this unit 

will automatically turn off.

{Off} - Disables REGZA-LINK features.

•  [Load Default]

Reset all settings of Blu-ray Disc™ Player 

to initial default state.

- Follow the instruction on the TV screen 

to confirm the default setting operation.

1. Select Load Default.

2. A dialog box pops up shown as 

below. Select OK.

3.It may take awhile when loading 

default is in progress. Please wait...

4. TV will display as follow:

   OK 

  Next

Wizard.
Some simple settings are suggested before you

begin. You can also access detailed settings

from the Setup Menu.

5. Press OK, enter language setting.

. Press OK, enter language setting. 

Press/ to select a language option.

Previous

English

OK 

  Next

The language selected will be applied not only

here but also in other OSD windows, menus 

etc.

Français
Español