M&S Systems MC3 プリント

for Chime Models MC3 and MC8

NOTE:    These chimes are used with series DMC1 and DMC3-4 MASTER UNITS.

1.  Snap the Chime Board onto the 4 plastic standoffs in the wallhousing.  See  

 

 

figure 1.

2.  BEFORE APPLYING POWER TO MASTER UNIT, plug chime connector into    

 

back of master unit at the location indicated by the printing on the circuit board.

3.  AFTER SYSTEM INSTALLATION IS COMPLETE apply power and adjust  

 

 

the chime volume to desired level.  The volume will increase in the clockwise    

 

direction. Make sure that all intercom speaker volume controls are turned to    

 

their maximum position before making adjustments.

115715 F

INSTR,INSTL,MC3/MC8 - LINEAR P/N: 115715 F - INK: BLACK - MATERIAL: 20 LB. MEAD BOND - SIZE: 8.500” X 11.000” - SCALE: 1-1 - SIDE 1 OF 2