Crimestopper Security Products CS-2004DC II ユーザーズマニュアル
2-VEHICLE OPERATION: (CS-2004DC II SYSTEM ONLY)
2-Vehicle method (CS-2004DC II SYSTEM ONLY):
Your CS-2004DC II remote includes a push-button on the side for 2-car
operation. You can only operate a second vehicle with a CS-2004DC II system
installed. Your remote must be programmed to the second vehicle first. Read
the following setup and operation descriptions. The CS-2004TW1 system
DOES NOT INCLUDE 2-VEHICLE OPERATION.
Your CS-2004DC II remote includes a push-button on the side for 2-car
operation. You can only operate a second vehicle with a CS-2004DC II system
installed. Your remote must be programmed to the second vehicle first. Read
the following setup and operation descriptions. The CS-2004TW1 system
DOES NOT INCLUDE 2-VEHICLE OPERATION.
SLNT
VEHICLE 2
AUX
BUTTON
SETUP:
See diagram at right on how to use your remote for vehicle #2 operation. To
set up your remote, follow the “Transmitter Programming” steps ON THE
SECOND VEHICLE and learn YOUR remote, along with Car #2’s existing
remotes. In step #4 press the side button on YOUR remote FIRST, then press
the Lock/Unlock button. Your vehicle should now be programmed for the
second vehicle.
See diagram at right on how to use your remote for vehicle #2 operation. To
set up your remote, follow the “Transmitter Programming” steps ON THE
SECOND VEHICLE and learn YOUR remote, along with Car #2’s existing
remotes. In step #4 press the side button on YOUR remote FIRST, then press
the Lock/Unlock button. Your vehicle should now be programmed for the
second vehicle.
2-VEHICLE OPERATION:
Press the side button on your remote first, and within 3 seconds, press a function button on YOUR remote to control
Vehicle #2. You can keep pressing function buttons to control car #2 as long as it is within the 3-second window.
After 3 seconds have elapsed, the your remote will revert back to Car #1 control.
Press the side button on your remote first, and within 3 seconds, press a function button on YOUR remote to control
Vehicle #2. You can keep pressing function buttons to control car #2 as long as it is within the 3-second window.
After 3 seconds have elapsed, the your remote will revert back to Car #1 control.
CARJACK PROTECTION
PROGRAMMABLE ACTIVE CARJACK
This feature provides Active remote-operated carjack protection and must be enabled before use through alarm
programming option #12. See page 13. When the Ignition is on (vehicle is running), press and hold Button #2
(Unlock) for more than 2 seconds. Parking lights will flash twice and LED will begin flashing to confirm the Carjack
countdown sequence. 30 Seconds later, the unit will begin a Carjack Cycle consisting of 30 seconds of pre-warning
chirps turning into a full system activation with siren/flashing light pulses for up to 5 min. If the Ignition is turned off
during a Carjack trigger the siren and lights stop but Carjack protection is STILL active. The Siren and Lights will
resume if the Carjacker tries to turn the Ignition back ON. To reset Active Carjack, press Button #2 (UNLOCK) on
the remote and the siren will chirp once, or turn the key on and press and hold the override button for at least 5
seconds (or until the flashing LED shuts off).
This feature provides Active remote-operated carjack protection and must be enabled before use through alarm
programming option #12. See page 13. When the Ignition is on (vehicle is running), press and hold Button #2
(Unlock) for more than 2 seconds. Parking lights will flash twice and LED will begin flashing to confirm the Carjack
countdown sequence. 30 Seconds later, the unit will begin a Carjack Cycle consisting of 30 seconds of pre-warning
chirps turning into a full system activation with siren/flashing light pulses for up to 5 min. If the Ignition is turned off
during a Carjack trigger the siren and lights stop but Carjack protection is STILL active. The Siren and Lights will
resume if the Carjacker tries to turn the Ignition back ON. To reset Active Carjack, press Button #2 (UNLOCK) on
the remote and the siren will chirp once, or turn the key on and press and hold the override button for at least 5
seconds (or until the flashing LED shuts off).
CARJACK INFORMATION CONTINUED ON NEXT PAGE.
23