Crimestopper Security Products CS-2004 WDC ユーザーズマニュアル

ページ / 17
 
 
 
 
CS-2004 WDC 
 
Remote Control Alarm System with CoolGlow & SecurWatch® 
 
INSTALLATION & OPERATING INSTRUCTIONS 
 
 
 INTRODUCTION: 
 
CONGRATULATIONS on your choice of a Remote Alarm System by Crimestopper Security Products Inc.  
This system features both a 4-Button CoolGlow Transmitter and a SecurWatch® Sports Watch 
Transmitter
 that feature anti code-grabbing technology.  The remote code changes with every use of the 
transmitter making it impossible to scan or record the codes for use later on.  This booklet contains the 
information necessary for installing, using, and maintaining the many features of this alarm system.  If any 
questions arise, contact your installation dealer or Crimestopper Security Products Inc. at the Tech Support 
number below. 
 
*IMPORTANT INFORMATION: Primary and Optional Features 
-PRIMARY:
  These are features that must be connected in order for the system to operate properly i.e. Siren, 
L.E.D., Power, Ground, Doorpin, etc. 
 
-OPTIONAL:  These are features to be connected only if desired or agreed upon by the installing dealer (i.e. 
Door Locks, Flashing Lights, Starter Kill, Hood, Trunk, and Auxiliary Remote Outputs etc.) 
 
*NOTE: If the system is programmed for Carjack Protection, AUX 1 will not be available when using the 
SecurWatch® Remote Transmitter AUX 1 can still be operated with the 4-Button CoolGlow transmitter 
when the system is setup for Carjack. 
 
This device complies with FCC Rules part 15. Operation is subject to the following 
two conditions: 1) This device may not cause interference, and (2) this device 
must accept any interference that may be received, including interference that may 
cause undesired operation.  The manufacturer is not responsible for any radio or 
TV interference caused by unauthorized modification to this equipment. Such 
modification could void the user's authority to operate the equipment.