Crimestopper Security Products CS-2002DPII ユーザーズマニュアル

ページ / 20
 
14 
#3
#1
#2
#4
LOCK
TRUNK
PANIC
UNLOCK
BANK #2
FLASHLIGHT
(AUX.)
PANIC
 
OPERATING INSTRUCTIONS 
 
6 BUTTON REMOTE TRANSMITTER: 
 
BANK #1 (Directly Press Buttons) 
 
Button 1:  Arm 
Button 2:  Disarm 
Button 3:  Aux #1 (Trunk) 
Button 4:  Panic 
Button 5:  (Change to BANK #2) 
 
BANK #2* (Press Bank #2 button FIRST, 
then within 3 seconds Buttons 1-4) 
 
Button 1: Silent Arm (No Chirp) 
Button 2: Silent Disarm (No Chirp) 
Button 3: Car Locator (5 light flashes, 1 
siren chirp 
Button 4: Aux #2
 
 
* Remote LED Blinks 3 seconds for Bank #2. 
 
 
ACTIVE ARMING 
To  arm  the  alarm  and  lock  the  doors,  press  the  #1  (Lock  Symbol)  button  on  the  transmitter.    You  will  hear  a  single 
siren chirp and the lights will flash once. The system will arm, the doors will lock and the starter will be disabled if these 
optional  features  are  installed.  The  red  LED  in  the  vehicle  will  start  flashing  after  5  seconds.    After  a  short  delay  to 
allow vehicle and electronics to stabilize the system will be completely armed. 
 
ALARM TRIGGERING 
If  there  is  an  intrusion  into  the  vehicle  or  hard  impact  to  the  body  will  sound  the  alarm  and  flash  the  lights  for  45 
seconds.    After  45  seconds  the  system  will  automatically  shut  off  and  re-arm  to  continue  to  protect  the  vehicle.    If  a 
door is left open, the unit will cycle a second time and still continue to protect the other un-tampered zones. 
 
DISARMING 
Press  the  #2  (Unlock)  button  on  the  transmitter  to  disarm  the  alarm.    You  will  hear  2  siren  chirps  and  the  lights  will 
flash twice.  The LED stops flashing.  Door will unlock and dome light will turn on if the options are installed.  If you are 
using the Optional Driver’s priority unlock, then the first press of the unlock button will unlock the driver’s door only and 
the second press will unlock the passenger door or doors.