Crimestopper Security Products SP-300 ユーザーズマニュアル

ページ / 16
 
 
 
 
 
SP-300 
2-WAY REMOTE CONTROL ALARM SYSTEM 
INSTALLATION INSTRUCTIONS 
 
 
INTRODUCTION 
 
CONGRATULATIONS  on  your  choice  of  a  Remote  Alarm  System  by  Crimestopper  Security  Products  Inc.  
This  booklet  contains  the  information  necessary  for  installing,  using,  and  maintaining  your  alarm  system.    If 
any  questions  arise,  contact  your  installation  dealer  or  Crimestopper  Security  Products  Inc.  at  the  Tech 
Support number below. 
 
*IMPORTANT INFORMATION: Primary and Optional Features: 
-PRIMARY:
  These  are  features that  must be  connected in  order  for  the system to  operate properly; i.e. the 
Siren, L.E.D., +12V Power, Ground, Door pin, Flashing lights Override/Program/Valet Button etc. 
 
-OPTIONAL:    These  are  features  to  be  connected  if  desired  or  agreed  upon  by  the  installing  dealer.  These 
features may also require additional parts and/or labor fees.  Consult with your installer beforehand; i.e. Door 
Locks, Starter disable, Hood/Trunk trigger, and Auxiliary Remote Outputs etc. 
 
This installation book is designed for the installer or individual with an existing understanding of automotive 
electrical systems, along with the ability to test and connect wires for proper operation.  To ease installation, 
we  suggest  that  you  READ  THIS  MANUAL  before  beginning  your  installation.    This  book  is  provided  as  a 
GENERAL GUIDLINE and the information contained herein may differ from your vehicle. 
 
    TECH SUPPORT 
Mon-Fri 8:00 AM-4:30 PM Pacific Time 
        (800) 998-6880 
 
 
REV.  12-12-2008 
 
 
 
 
 
 
This  device  complies  with  FCC  Rules  part  15.  Operation  is  subject  to 
the following two conditions: 1) This device may not cause interference, 
and (2) this device must accept any interference that may be received, 
including  interference  that  may  cause  undesired  operation.    The 
manufacturer is not responsible for any radio or TV interference caused 
by  unauthorized  modification  to  this  equipment.  Such  modification 
could void the user's authority to operate the equipment.