First Alert 1 ユーザーズマニュアル
– 11 –
6<67(029(59,(:
Master Keypad Definitions
NOTE: The system functions described below are for reference only, and require additional key entries to activate.
1. DISPLAY WINDOW: Liquid Crystal Display
(LCD). Displays protection point identification and
system status, messages, and user instructions.
system status, messages, and user instructions.
2. ARMED INDICATOR: (RED) Lit when the
system has been armed (STAY, AWAY, NO
DELAY). Blinks when armed and fault exists, o
DELAY). Blinks when armed and fault exists, o
r
once per second when AVM (VOX or Talk) or
speaker phone mode is active.
speaker phone mode is active.
3. READY INDICATOR: When lit, indicates system
is ready to be armed; blinking indicates system is
not ready (a zone is open). Blinks once per second
when AVM (VOX or Talk) or speaker phone mode
is active.
not ready (a zone is open). Blinks once per second
when AVM (VOX or Talk) or speaker phone mode
is active.
4.
PLAY
KEY: Announces a user’s message if one
was previously recorded. See RECORD function.
5.
TEST
KEY: Tests the system and alarm
sounder.
6.
BYPASS
KEY: Removes individual protection
zones from being monitored by the system. Displays
currently bypassed zones.
currently bypassed zones.
7.
CODE
KEY: Allows entry of additional user
codes that can be given to other system users.
8.
CHIME
KEY: Turns the Chime mode on and
off. When on, any entry through a protected delay
or perimeter zone while the system is disarmed
will cause a tone and voice descriptor to sound at
the keypad.
or perimeter zone while the system is disarmed
will cause a tone and voice descriptor to sound at
the keypad.
9. INTERNAL SOUNDER: Source of alarm sounds
(see "Summary of Audible Notifications" section).
10.
FUNCTION
KEY: Allows alternate key
functions.
11.
NO DELAY
KEY: Used with STAY or AWAY
function to eliminate the entry delay. Alarm sounds
immediately if entry is opened.
immediately if entry is opened.
12.
STATUS
KEY: When pressed prior to arming,
the keypad will display all open zones, and will
announce system status.
announce system status.
13.
LIGHTS ON
/
LIGHTS OFF
KEYS: Turns lights or
other devices on or off, if programmed by the installer.
14.
AUX
KEY: Can be programmed to either perform a
predefined function or to send a preset message to a
pager.
pager.
15.
STAY
KEY: Arms the perimeter burglary protection,
guarding protected doors, windows and other perimeter
protection points, and sounds an alarm if one is opened.
Interior protection is not armed, which allows
movement within your house without causing an alarm.
Entrance can be made through an entry delay zone
without causing an alarm if the system is disarmed
before the entry delay time expires.
protection points, and sounds an alarm if one is opened.
Interior protection is not armed, which allows
movement within your house without causing an alarm.
Entrance can be made through an entry delay zone
without causing an alarm if the system is disarmed
before the entry delay time expires.
16.
AWAY
KEY: Completely arms both perimeter and
interior burglary protection for backup protection by
sensing an intruder's movements through protected
interior areas as well as guarding protected doors,
windows, etc. Entrance can be made through an entry
delay zone without causing an alarm if the system is
disarmed before the entry delay time expires.
sensing an intruder's movements through protected
interior areas as well as guarding protected doors,
windows, etc. Entrance can be made through an entry
delay zone without causing an alarm if the system is
disarmed before the entry delay time expires.
17.
OFF
KEY: Disarms the burglary portion of the
system, silences alarms and audible trouble indicators,
and clears alarm trouble display after the problem has
been corrected.
and clears alarm trouble display after the problem has
been corrected.
18. MICROPHONE: Used to record personal messages
up to 20 seconds long, and for 2 way voice and speaker
phone.
phone.
19. SPEAKER: Source of audible internal warning and
confirmation sounds, status announcements, as well as
alarms (see "Summary of Audible Notifications").
alarms (see "Summary of Audible Notifications").
20. RECORD: Activates the recording function to record
personal messages.
21. VOLUME: Sets the volume of system announcements
and status beeps.
–– KEYS 0-9: Used to enter your individual security
access code(s).