Pelco DX8000 ユーザーズマニュアル

 

18

C623M-C (3/05)

 

Basic Connections

 

Make the following connections on the rear of the recorder. Refer to Figure 8.

 

 

Connect the appropriate power cord to the back of the unit and to a power source.

 

Connect the mouse to the top PS/2 input.

 

Connect the keyboard to the bottom PS/2 input.

Connect a VGA monitor (not supplied).

NOTE:  The DX8000 contains an autoranging power supply. It is recommended that the recorder be connected to an uninterruptible power 
supply (UPS) capable of supplying 2 A for 120 VAC power systems or 1 A for 230 VAC power systems.

Table A.  Video Coaxial Cable Requirements

RG59/U

750 ft (229 m)

RG6/U

1,000 ft (305 m)

RG11/U

1,500 ft (457 m)

*Minimum cable requirements:

75 ohms impedance
All-copper center conductor
All-copper braided shield with 95% braid coverage

When connecting cameras using these types of cable, use a 
patch panel. Do not connect these cables directly to the 
DX8000.

SPECTRA

VGA

CAMERA

KEYBOARD

MOUSE

POWER
CONNECTION