Night Owl Optics 4BL ユーザーズマニュアル

User’s Manual 

20 

 

STATIC IP 
1.  Select STATIC as the network TYPE. 
2.  Leave Media Port at 9000   
3.  Setup WEB Port (leave at 80 but some ISPs block 

inbound traffic on port 80 to prevent web servers so if 
the DVR cannot be remotely accessed choose a 
different port number) 

4.  Enter the IP Address that you have reserved at the 

beginning of this section into this field to be the unique 
address of your DVR in your local network. 

5.  NETMASK: It is recommended to leave the Subnet 

mask as the default 255.255.255.0. 

6.  Set the GATEWAY to the IP Address of your router. 
7.  Set the DNS (Domain Name Server) Address to the IP 

Address of your router.   

8.  Leave the UPNP option at “Enable”.  Click “APPLY” to 

save your changes. 

 

 

PPPoE 
1.  If your ISP provides you a Static IP Address, select 

STATIC as the network TYPE. 

2.  Leave Media Port at 9000   
3.  Setup Web Port (leave at 80 but some ISPs block 

inbound traffic on port 80 to prevent web servers so if 
the DVR cannot be remotely accessed choose a 
different port number) 

4.  Enter your PPPoE NAME and PASSWORD so your 

DVR will be able to obtain service from your ISP. 

5.  Leave the UPNP option at “Enable”.    Enter the DNS 

(Domain Name Server) address. 

 

You will need to apply for a Dynamic DNS account and 
register a Domain Name with one of the known DDNS 
provider.  Enter your DDNS Provider’s HOST NAME, 
USERNAME, and PASSWORD in the DDNS SETUP 
page. 

 If you would like a free DNS account please visit