Radio Shack 49-2551A ユーザーズマニュアル
24
RECORDING A VOICE
MESSAGE
MESSAGE
Follow these steps to record your voice
message. For example,
message. For example,
There is a
possible burglary in progress at (ad-
dress). Please press
dress). Please press
0
to listen-in, then
call the police if you confirm there is a
problem.
problem.
Notes:
• Your message should instruct the
person to press any number on
their touch-tone phone. If the lis-
tener presses a number, the alarm
stops and they can listen-in for 75
seconds.
their touch-tone phone. If the lis-
tener presses a number, the alarm
stops and they can listen-in for 75
seconds.
• If the emergency dialer reaches
an answering machine, it plays its
message just as it would if some-
one picked up the phone. How-
ever, since the answering machine
cannot trigger the “listen-in” func-
tion and stop the alarm, the dialer
continues dialing and playing its
message.
message just as it would if some-
one picked up the phone. How-
ever, since the answering machine
cannot trigger the “listen-in” func-
tion and stop the alarm, the dialer
continues dialing and playing its
message.
1. Set
INSTALL/RUN 1/RUN 2
on the
console to
INSTALL.
2. Press
RECORD
. The REC/BUSY
light turns on.
3. Speak clearly into the microphone
on the front of the console. You
can record a message up to 15
seconds long. After 15 seconds,
REC/BUSY turns off.
can record a message up to 15
seconds long. After 15 seconds,
REC/BUSY turns off.
Note: Be sure REC/BUSY is off
before you try to initialize any
accessory.
before you try to initialize any
accessory.
4. Plug the supplied earphone into
the jack on the side of the con-
sole.
sole.
5. Set
INSTALL/RUN 1/RUN 2
on the
console to
RUN 1
or
RUN 2
. The
console plays back your message
through the earphone.
through the earphone.
Note: The message usually
sounds better when it is played
back over the phone line.
sounds better when it is played
back over the phone line.
49-2551AB.fm Page 24 Friday, February 19, 1999 3:41 PM