Radio Shack 49-426 プリント

ページ / 2
49-426
01A02
Printed in China
RadioShack Corporation
Fort Worth, Texas 76102
1
0
"
#
"9
#..
1. Using the mounting bracket as a 
template, mark the location for the two 
screw holes on the wall.
2. Drill two 
3
/
16
-inch (4.7 mm) holes for the 
supplied anchors and hammer them into 
the wall.
3. Use the two 
supplied screws 
to attach the 
mounting bracket 
to the anchors.
4. Insert the motion 
detector into the 
bracket with the 
sensing lens facing out.
5. Slide the motion detector's mounting 
tabs into the bracket's grooved slots until 
it clicks into place, then rotate the motion 
detector to the desired angle.
75+0)"6*'"/16+10"&'6'%614
1. To use the motion detector to announce 
someone's presence, set 
CHIME/OFF/
ALARM
 to 
CHIME
. When the sensor 
detects movement, it sounds a pleasant 
tone and the red indicator lights.
To use the motion detector to detect 
movement, set 
CHIME/OFF/ALARM
 to 
ALARM
. When the sensor detects 
movement within the detection angle, 
the red indicator lights. Then, it sounds a 
loud siren after about 15 seconds. The 
indicator stays lit until you set 
CHIME/
OFF/ALARM
 to 
OFF
.
2. To turn off the motion detector, set 
CHIME/OFF/ALARM
 to 
OFF
. The red 
indicator turns off.
6417$.'5*116+0)
If you have problems with your motion detector, the following chart might help. If you still have 
problems, take the motion detector to your local RadioShack store for assistance.
%#4'
Keep the motion detector dry; if it gets wet, 
wipe it dry immediately. Use and store the 
motion detector only in normal temperature 
environments. Handle the motion detector 
carefully. Keep the motion detector away 
from dust and dirt, and wipe it with a damp 
cloth occasionally to keep it looking new.
5'48+%'"#0&"4'2#+4
If your motion detector is not performing as it 
should, take it to your local RadioShack store 
for assistance. Modifying or tampering with 
the motion detector’s internal components 
can cause a malfunction and might invalidate 
its warranty.
52'%+(+%#6+105
Detection Coverage  ................................ 30 feet (at 20°C)
Detection Angle ..............................................100 degrees
Power  ............................................DC 9V/500mAh battery
Standby Current  .........................................180
µ
A (typical)
Operating Current  .......................................60mA (typical)
Alarm Exit Delay Time ................................ 15 sec ± 4 sec
Alarm Entry Delay Time  ............................. 15 sec ± 4 sec
Alarm Auto Reset Time  .............................. 30 sec ± 5 sec
Warm-up Time .........................................  30 sec – 50 sec
Siren Sound  ..........................................  90 dB/ft. (typical)
Operating Temperature ................  32°F – +104°F (Indoor)
External Trigger Input............... Two Inputs (Normal Close)
Battery Life (standby) .......... 3.4 months at 180
µ
A (typical)
Specifications are typical; individual units might vary. 
Specifications are subject to change and improvement 
without notice.
±
"016'"
±
"
When you set CHIME/OFF/ALARM to ALARM
the motion detector does not detect any motion 
for about 15 seconds to allow you to leave the 
area. Then, when the sensor detects movement 
it sounds the siren for about 30 seconds.
2TQDNGO
2TQDCDNG"%CWUG
4GOGF[
Detector does 
not sound 
when an object 
should be 
detected.
CHIME/OFF/ALARM set to OFF.
Set CHIME/OFF/ALARM to CHIME or ALARM.
Battery low or dead.
Replace the battery.
Battery not installed.
Install a new battery.
Detection angle incorrect.
Adjust the motion detector’s angle.
Lens window blocked.
Clear the lens window of obstructions.
 Detection 
range is too 
short.
Lens window is dusty or dirty.
Clean the lens window.
Detection angle incorrect.
Adjust the motion detector’s angle.
Detection area too hot, moist, or windy. Change the motion detector’s location.
Alarm or chime 
is weak.
Battery low or dead.
Replace the battery.
Siren blocked.
Clear the siren opening of obstructions.
Limited Ninety-Day Warranty
This product is warranted by RadioShack against manufacturing
defects in material and workmanship under normal use for ninety
(90) days from the date of purchase from RadioShack company-
owned stores and authorized RadioShack franchisees and deal-
ers. EXCEPT AS PROVIDED HEREIN, RadioShack MAKES NO
EXPRESS WARRANTIES AND ANY IMPLIED WARRANTIES,
INCLUDING THOSE OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION
TO THE DURATION OF THE WRITTEN LIMITED WARRAN-
TIES CONTAINED HEREIN. EXCEPT AS PROVIDED HEREIN,
RadioShack SHALL HAVE NO LIABILITY OR RESPONSIBIL-
ITY TO CUSTOMER OR ANY OTHER PERSON OR ENTITY
WITH RESPECT TO ANY LIABILITY, LOSS OR DAMAGE
CAUSED DIRECTLY OR INDIRECTLY BY USE OR PERFOR-
MANCE OF THE PRODUCT OR ARISING OUT OF ANY
BREACH OF THIS WARRANTY, INCLUDING, BUT NOT LIM-
ITED TO, ANY DAMAGES RESULTING FROM INCONVE-
NIENCE, LOSS OF TIME, DATA, PROPERTY, REVENUE, OR
PROFIT OR ANY INDIRECT, SPECIAL, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES, EVEN IF RadioShack HAS
BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Some states do not allow limitations on how long an implied war-
ranty lasts or the exclusion or limitation of incidental or conse-
quential damages, so the above limitations or exclusions may
not apply to you.
In the event of a product defect during the warranty period, take
the product and the RadioShack sales receipt as proof of pur-
chase date to any RadioShack store. RadioShack will, at its op-
tion, unless otherwise provided by law: (a) correct the defect by
product repair without charge for parts and labor; (b) replace the
product with one of the same or similar design; or (c) refund the
purchase price. All replaced parts and products, and products on
which a refund is made, become the property of RadioShack.
New or reconditioned parts and products may be used in the
performance of warranty service. Repaired or replaced parts and
products are warranted for the remainder of the original warranty
period. You will be charged for repair or replacement of the prod-
uct made after the expiration of the warranty period.
This warranty does not cover: (a) damage or failure caused by or
attributable to acts of God, abuse, accident, misuse, improper or
abnormal usage, failure to follow instructions, improper installa-
tion or maintenance, alteration, lightning or other incidence of
excess voltage or current; (b) any repairs other than those pro-
vided by a RadioShack Authorized Service Facility; (c) consum-
ables such as fuses or batteries; (d) cosmetic damage; (e)
transportation, shipping or insurance costs; or (f) costs of prod-
uct removal, installation, set-up service adjustment or reinstalla-
tion.
This warranty gives you specific legal rights, and you may also
have other rights which vary from state to state.
RadioShack Customer Relations, 200 Taylor Street, 6th Floor, 
Fort Worth, TX 76102
12/99