Heath Zenith SL-4100 ユーザーズマニュアル
Model SL-4100
Features
• Light comes on when motion is detected.
• Automatically controls existing post light.
• D
• Automatically controls existing post light.
• D
ual
B
rite
®
Timer.
• Photocell keeps the light off during daylight
hours.
This package includes:
© 2007 HeathCo LLC
595-5657-04
TEST
Requirements
• The light control requires 120 volts AC.
• If you want to use Manual Override, the
• If you want to use Manual Override, the
control must be wired through a switch.
•
Some codes require installation by a
qualified electrician.
qualified electrician.
Motion Sensing Post
Light Adapter
Light Adapter
3 Wire Connectors
3 Screws
Post Light
Adapter
ON-TIME
MINUTES
ACCENT
Put ON-TIME switch on the sensor bottom
to TEST and the D
to TEST and the D
ual
B
rite
®
(ACCENT)
switch OFF.
MANUAL MODE
... back on.
1 Second
OFF then...
OPERATION
AUTO
Set ON-TIME switch to
1, 5, or 20 minutes.
1, 5, or 20 minutes.
Manual mode only works at
night because daylight re-
turns the sensor to AUTO.
Flip the light switch off for
one second then back on to
toggle between AUTO and
MANUAL MODE.
Manual mode works only
with the ON-TIME switch in
the 1, 5, or 20 position.
night because daylight re-
turns the sensor to AUTO.
Flip the light switch off for
one second then back on to
toggle between AUTO and
MANUAL MODE.
Manual mode works only
with the ON-TIME switch in
the 1, 5, or 20 position.
* resets to Auto Mode at dawn.
Note:
When first turned on wait about 1
1
/
2
minutes for the circuitry to calibrate.
Mode:
On-Time
Works: Day Night
Test
5 Seconds
x
x
Auto
1, 5, or 20 Min
x
Manual
To Dawn*
x
Accent
3, 6 Hr, to Dawn
x
DUSK TO DAWN
6 HOUR
3 HOUR
3 HOUR
OFF
20
5
1
1
TEST
20
5
1
1
TEST
Before installation, record the model number
from back of fixture below. Attach receipt in
case of possible warranty issues.
from back of fixture below. Attach receipt in
case of possible warranty issues.
Meets the ENERGY STAR
®
guidelines when D
ual
B
rite
®
function is off and ON-TIME
is 1 or 5 minutes.
is 1 or 5 minutes.