SVAT Electronics qxd600 ユーザーズマニュアル

1. Locate the area you would like to place your camera. Please note 

that you have a maximum distance of 60ft supplied with this

unit.

2. You will have to rotate the camera bracket to uncover the 

screw insertion areas. Install the camera accordingly. 

Note: the camera can operate standing alone but 

screws will provide more support. (Picture on right)

3. Plug the correct end of the supplied cable to the 

back of the camera.

4. Locate the area where you will place your monitor 

and plug it in. Make sure that the power is turned off before you 

proceed. To turn off the monitor press the power button in the front 

of the monitor.

5.  Plug the cable into the audio/video input jacks. Make sure that the 

white and yellow plugs on the cable correspond with the white and 

yellow jacks on the monitor.

6.  Turn the monitor on. The feed from the camera should be on the 

monitor. If not, press the function switcher button to change the 

channel. 

7. If you would like to record on your VCR, plug RCA cables into the 

audio/video output jacks on the monitor and match them into the 

corresponding jacks on your VCR input jack. Switch to your VCR’s 

input channel and you can now record.

w w w . s v a t . c o m