SVAT Electronics CLEARVU7 ユーザーズマニュアル

now you can see

CLEARVU7

6

1.  For manual switching between video Inputs, press the AV1/AV2 button on the monitor or AV on the remote control to switch

between video inputs.

2.  Press the AUTO button on the monitor to activate auto mode, which will automatically cycle between both inputs. Pressing it 

once will set the cycle interval to 4 seconds. Pressing it again will set the cycle interval to 6 seconds. Pressing AUTO a third time 
will set the cycle interval to 8 seconds, and pressing the Auto button a fourth time will turn off auto mode.

Press the menu button to display the following options:

PICTURE, OPTION, CLOCK, SYSTEM

1.  Press the menu button once to display the PICTURE menu.
2.  In this menu you can adjust Contrast, Brightness, Color, Sharpness, and Tint.
3.  Use the channel up and down buttons on the monitor or remote to select the 

desired setting, and use the volume buttons to increase or decrease the values.

4.  Press the MENU key 3 times to exit the PICTURE menu.

NOTE: Picture quality can vary by environment. You can press PICT on the monitor or remote to 

cycle between STANDARD, SOFT, VIVID, LIGHT, and PERSONAL viewing modes.

1.   Press the menu button twice to display the OPTION menu.
2.   In this menu you can adjust Language, Calendar, and Auto Change Source.
3.   To change the language, select it and use the volume keys to scroll through the 

available languages (English, Russian, German, Italian, Chinese, Dutch, Arabic, 
Spanish, Portuguese, French).

4.   To view the calendar, select it and press the volume up button. To scroll through 

the months, use the volume up and down buttons. To scroll between years, use 
the channel up and down buttons. Press menu to exit calendar mode.

5.   The auto change source option provides the same functionality as pressing the 

AUTO button. Select it, and use the volume buttons to change the interval time 
between OFF, 4s, 6s, and 8s.