SVAT Electronics CV301-8CH ユーザーズマニュアル

CV301-8CH

now you can see

This menu option gives you information about your HDD (Hard Disk Drive), allows you to enable overwrite mode, and 

format the hard drive and/or USB drive. 

•  HDD Status:  

Displays the current operating status of the hard drive. If the Hard Drive is functioning 

normally it will display “OK”

•  Total Space:  

Tells you how much space you have altogether on your HDD 

•  Free Space:  

Tells you how much space you have available to record on the HDD before all the HDD 

space is used up

•  Usable Rec Time:    Amount of remaining time available to record 

When the HDD has overwrite enabled, it will record over the oldest footage once the HDD fills up instead of stopping 

the recording, this way the DVR is always recording. If you want to stop recording when the HD is full, set overwrite  

to “Disable”.

To Enable/Disable overwrite mode: 
1.  Select the drop down menu beside “Overwrite”. 
2.  Select either “enable” to turn overwrite on or “disable” to turn overwrite off. 
3.  Select “apply” to save settings.