Siemens A31003-51730-U103-7619 ユーザーズマニュアル
Installation
For internal use only
07/2010
3-2
OScAR-Pro Customized Operator, User Manual
BHB_DCO_03.fm
How to install the OpenScape Alarm Response Professional
3.1
How to install the OpenScape Alarm Response Professional
The entire OpenScape Alarm Response Professional can be installed in a single process.
To install the software on your computer, the following requirements must be fulfilled:
●
Microsoft Windows 2000 Professional or Windows XP (if necessary also Windows 2003
Server) must be installed on your PC.
Server) must be installed on your PC.
●
You need to be familiar with the Windows operating system and you must know how to
install software.
install software.
●
OScAR-Pro Release 7 or OScAR-Pro V3 R2, respectively, must be installed on your PC or
in your network (for details please refer to the OScAR-Pro User Manual).
in your network (for details please refer to the OScAR-Pro User Manual).
●
OScAR-Pro-TT-Server has previously been connected at least once with the correspond-
ing OScAR-Pro server (online).
ing OScAR-Pro server (online).
>
Please bear in mind that under Windows 2000/XP, you must have the administrative
rights to install OScAR-Pro Cus-tomized Operator (DCO)!
rights to install OScAR-Pro Cus-tomized Operator (DCO)!
>
Follow the system instructions output during the installation. Click Back if you want
to return to the previous window, for example to make changes. If you want to end
and not finish the installation, click Cancel.
to return to the previous window, for example to make changes. If you want to end
and not finish the installation, click Cancel.
No. Task
Window
1.
Place the Installation CD in the CD-ROM
drive.
drive.
If the installation software fails to start auto-
matically, please start the CD installation
manually from the Windows interface by us-
ing the command "Run menu":
matically, please start the CD installation
manually from the Windows interface by us-
ing the command "Run menu":
To trigger this command you need to enter
<CD-Rom drive>:\cdsetup
<CD-Rom drive>:\cdsetup
e.g.: d:\cdsetup
in the command line and confirm your entry
with OK.
with OK.
Table 3-1
How to install the OScAR-Pro Customized Operator