Bosch NDN-733 ユーザーズマニュアル

Camera Browser Interface

Recording | en

Bosch Security Systems

Software manual

AM18-Q0635 | v5.6 | 2013.01

Standard and alarm recording can be defined for the two 

recording tracks. You must first select the track before setting 

up the standard and alarm recording parameters.

1.

Click the Recording 1 entry in the list.

2.

Set up the standard and alarm recording parameters for 

track 1 as described below.

3.

Click the Recording 2 entry in the list.

4.

Set up the standard and alarm recording parameters for 

track 2 as described below.

Specify whether, in addition to video data, audio or metadata 

(for example alarms or VCA data) should also be recorded. (To 

change the global audio format, click the audio recording 

format link.)

Including metadata could make subsequent searches of 

recordings easier but it requires additional memory capacity. 

Without metadata, it is not possible to include video content 

analysis in recordings.

Select the mode for standard recordings:

–

Continuous: the recording proceeds continuously. If the 

maximum recording capacity is reached, older recordings 

are overwritten automatically.

–

Pre-alarm: recording takes place in the pre-alarm time, 

during the alarm and during the post-alarm time only.

–

Off: no automatic recording takes place.

Select the stream to be used for standard recordings: 

–

–

–