Honeywell EN2H-0221GE51 R0808 ユーザーズマニュアル

SDC / DHC 

Operation 

EN2H-0221GE51 R0808 

73 

This parameter specifies enabling of the switching time programs 
for program selection and for individualised switching time 
programming. In the state of delivery, only one switching time 
program is enabled. This achieves simplification of operation with 
a large portion of applications for which only one switching time 
program is used. 

 

P1 

Program 1 = enabled, programs 2 and 3 = disabled 

P1 to P3 

All three programs enabled 

 

P1 

 

In contrast to the previous description, the following setting 
options are available when programs P1 to P3 are enabled: 

 

•  Operating mode selection: In the AUTOMATIC and SUMMER 

operating modes, switching time program P1, P2 or P3 can be 
selected. 

•  Switching time programming: With switching time pro-

gramming, the three switching time programs, P1 to P3, can 
be selected for each heating circuit. 

 

In the AUTOMATIC and SUMMER control modes, switching time 
program P1, P2 or P3 can be selected. 

 

With switching time programming, the three switching time 
programs, P1 ... P3 can be selected.