Honeywell EN2H-0221GE51 R0808 ユーザーズマニュアル
SDC / DHC
Operation
EN2H-0221GE51 R0808
81
These error messages evaluate the control result to be expected.
They appear depending on the type and allocation with fault code
50 to 60 and index 0, 1 or 2.
They appear depending on the type and allocation with fault code
50 to 60 and index 0, 1 or 2.
These error messages refer to address faults such as double
issuance or non-recognition of address settings on the data bus.
They appear with fault code 70 and index 0 or 1, depending on
the type and assignment.
issuance or non-recognition of address settings on the data bus.
They appear with fault code 70 and index 0 or 1, depending on
the type and assignment.
5.4 Parameter
settings
5.4.1 "Hydraulics" menu (HYDRAULIC)
The parameters in this menu refer to the general system
hydraulics and the functions and configuration of the
programmable inputs and outputs for the respective system
components. Representative of many individual settings, the
applications are only defined by the 1st parameter of this setting
table.
hydraulics and the functions and configuration of the
programmable inputs and outputs for the respective system
components. Representative of many individual settings, the
applications are only defined by the 1st parameter of this setting
table.
Example: The controller is to cover system No 0202. Provided
that the controller features enough relays, parameter 01 must be
set to value 0202.
that the controller features enough relays, parameter 01 must be
set to value 0202.
Para-
meter
meter
Designation
Setting range / Setting values
Factory
setting
setting
Setting
01 Hydraulic
schematic
0, 0101, 0102, ... n
0
OFF No
function
1
1 Hot-water
charging
pump
4 Circulating
pump
02 Hot-water
charging
pump output
5
Electric heating rod
Logical error
messages
Bus error messages