Desa BVSR18 ユーザーズマニュアル

www.desatech.com

901746-01E

INSTALLATION

WARNING: The Massachu-

setts State Board requires all

installations be performed by

a Licensed Plumber or Gas Fit-

ter. Massachusetts state code

requires all vent dampers be

welded open or removed.

CAUTION: Do not remove

the data plates attached to the

burner pan. The data plates

contain important warranty and

safety information.

WARNING: Before installing

in a solid fuel burning fireplace,

the chimney flue and firebox

must be cleaned of soot, creo-

sote, ashes and loose paint by

a qualified chimney cleaner.

Creosote will ignite if highly

heated. A dirty chimney flue may

create and distribute soot within

the house. Inspect chimney flue

for damage.

NOTICE: Installation, service,

and repair of this appliance must

be performed by a qualified in-

staller, service agency, company

or gas supplier experienced with

this type of gas appliance. Only

factory authorized components

listed in these instructions may

be used in accordance with the

manufacturer’s instructions and

all codes and requirements of

the authority having jurisdic-

tion. Any modifications to this

kit, or use of unauthorized

components or accessory items

will void the manufacturer’s

warranty, and may result in a

hazardous condition.

FLUE OPENING SPECIFICATIONS

Note: This vented appliance must be installed
only in a solid-fuel burning fireplace with a
working flue and constructed of noncombus-
tible material.
The charts in Figure 2, page 6, indicate tech-
nical information regarding the installation of
your gas log set. Please make sure that all of
the specifications shown are applicable before
installation is attempted.
The fireplace must include a working flue and
venting system with minimum openings