Paradox Hellas S.A. EVO96 ユーザーズマニュアル

Option 

[1]: Access Control

Option 

[2]: Can Disarm with Access Card

Option 

[3]: Extended Unlocked Period

Options [4] and [5]: Arming with Card

[4] ON, [5] OFF:Regular Arm
[4] OFF, [5] ON:Stay Arm
[4] and [5] ON:Force Arm
[4] and [5] OFF:Disable the Arming with Card feature

Option 

[6]:Add Tolerance Window to Schedule

Option 

[7]:Code Follows Schedule

Option 

[8]:Card to Unlock and Code to Disarm

13. Enter the Access Control card’s serial number within the brackets.

14. Press the [

] button to save and exit.

1. Enter your [

] or [

] with Master feature.

2. Press the [

] key to enter the User Programming Menu. The area lights of 

areas assigned to your User Access Code and the 

 action light will flash. 

3. Press the [

] key. The area lights of the areas assigned to your User Access 

Code and the 

 action light will illuminate. The 

 action light will 

continue to flash.

4. Enter a 3-digit number (002 to 999) you wish to program. The 

 action 

light will flash for an unused code. If the code is used, 

 action light and the 

first number of the code will illuminate. The 

 action and area light will turn 

off. 

5. Enter a User Code. If you do not want to change an existing one, press the 

U

 

key until you reach User Options. Your keypad will emit a Half Beep when it 
switches to User Options. Pre-existing options will illuminate. 

6. Program the User Options by turning the options “ON” or “OFF”. Once the 

options are programmed, press the 

U

 key to reach the Area Assignment. Your 

keypad will emit a Half Beep when it switches to Area Assignment. Pre-existing 
assignments will illuminate. 

7. Program the Area Assignment. Press the 

V

 key to return to User Options or 

press [

] to save and exit. Your keypad will emit a Confirmation Beep to 

confirm the code’s acceptance.

Options [1] and [2]: Master Feature
When option [1] is OFF, the User cannot program other users into the system.
When option [1] is ON and option [2] is OFF, the user can program and modify user 
access codes (P.I.N. only) and User Labels. 

When both options [1] and [2] are ON, the user has Full Master rights. The user can 
create or modify user access codes, User Options, User Access Control Options, Access 
Card Numbers, User Labels and Area Assignments according to their own programming. 
For example, if the Full Master User has access to area #1 and option [4] (Bypass) only, 
the Full Master user can only assign area #1 and option [4] to other users in the system. 

Option [3]: Duress 
When option [3] is ON, the Duress feature is enabled. This feature is used when someone 
forces a user to arm or disarm an area(s). By entering a user access code (P.I.N.) 
reserved for the Duress feature, the system will arm or  disarm the area(s), and then send 
a silent alarm to the monitoring station.