Princess Household Appliances BV 2518 ユーザーズマニュアル

ページ / 20
4
PRINCESS-TIPS
- Deze ventilator is alleen voor huishoudelijk gebruik.
- Zorg dat het snoer of een eventueel verlengsnoer zodanig weggelegd wordt dat niemand erover kan
struikelen.
- Bij beschadiging van de ventilator of het snoer raden wij u aan het apparaat niet meer te gebruiken
maar naar de winkel terug te brengen voor reparatie. Een beschadigd snoer kan alleen door de 
servicedienst vervangen worden.
- Niet buitenshuis gebruiken.
- Zorg dat kinderen er niet bij kunnen. 
-  Plaats de ventilator op een stevige tafel of kast of ander stabiel oppervlak. Zet de ventilator niet in of
vlakbij een open raam. Zorg dat voorwerpen uit de omgeving van de ventilator verwijderd zijn als het
automatisch zwenken ingeschakeld wordt om omvallen en/of blokkeren te voorkomen.
-  Gebruik de ventilator niet in vochtige ruimtes, zoals badkamers, en plaats deze ook niet dichtbij een
wastafel of andere bak met water. 
-  Zorg dat gordijnen en andere voorwerpen van stof niet in de ventilator gezogen kunnen worden.
PRINCESS CLASSIC TABLE FAN 
ART. 2518
Please read these instructions at your leisure and save them for future reference.
The PRINCESS CLASSIC TABLE FAN is a solid metal table fan in an attractive classical design. It is
fitted with a 25 cm fan blade, an independently adjustable swivelling mechanism and tilting foot. The
powerful, silent induction motor can be set to 3 different speeds.
Pick up the fan carefully and place it on a solid surface. Plug this appliance only into an earthed outlet.
Check the mains voltage which should be 230 V. The PRINCESS CLASIC TABLE FAN is not suitable
for use in damp rooms such as bathrooms and it is also not suitable for use outside.
DESCRIPTION
On/off and Speed switch (2)
Switches the motor on/off and allows a choice of 3 speeds to be made.
Button for automatic swivelling on/off (4)
Pull up: automatic swivelling is switched on.
Press down: switches swivelling off.
Adjustable screw for setting tilt angle (3)
This allows the direction that the fan blows to be set at the desired angle. Loosen the screw a couple of
turns by hand and tilt the fan up or down as desired. Then retighten the screw firmly by hand.
PARTS
1. base
2. speed slider
3. tilt control knob
4. swivelling on/off
5. motor shaft
6. rear guard
7. locking nut
8. fan blade screw
9. fan blade
10. front guard
11. screw
ASSEMBLY
1. Position the rear guard over the motor shaft, ensuring that the notches are correclty alig-
ned and then secure with the locking nut.
2. Align the fan blade with the flat part on the motor shaft, locate fully and secure by tigh-
tening the fan blade screw fully. The screw should be positioned between the motor hou-
sing and the blade.