Mellerware 35810 ユーザーズマニュアル
SAFETY ADVICE AND WARNINGS
•Read this instruction leaflet carefully before using
the appliance, and keep it for future consultation.
•Position the appliance on an even, stable surface,
away from the heat and possible water splashes.
•Ensure that the indicated voltage on the rating la-
bel matches the mains voltage before plugging in
the appliance.
•Do not use the appliance if the cord is damaged.
•Never touch the plug with wet hands.
•Unplug the appliance by pulling on the plug, not
on the cord.
•Unplug the appliance from the mains when not in
use and before cleaning.
•This appliance is for household use only, not in-
dustrial use.
•Never leave the appliance unattended.
•This appliance is intended for use by adults. Do
not allow children or disabled persons to use it.
•Do not move or change the position of the appli-
ance whilst in operation.
•Any inappropriate use or non-compliance with the
operating instructions renders the warranty and the
manufacturer's liability null and void.
•Never insert fingers, pencils or any other objects
through the grille while the fan is operating.
•Completely assemble the fan before switching it
on.
the appliance, and keep it for future consultation.
•Position the appliance on an even, stable surface,
away from the heat and possible water splashes.
•Ensure that the indicated voltage on the rating la-
bel matches the mains voltage before plugging in
the appliance.
•Do not use the appliance if the cord is damaged.
•Never touch the plug with wet hands.
•Unplug the appliance by pulling on the plug, not
on the cord.
•Unplug the appliance from the mains when not in
use and before cleaning.
•This appliance is for household use only, not in-
dustrial use.
•Never leave the appliance unattended.
•This appliance is intended for use by adults. Do
not allow children or disabled persons to use it.
•Do not move or change the position of the appli-
ance whilst in operation.
•Any inappropriate use or non-compliance with the
operating instructions renders the warranty and the
manufacturer's liability null and void.
•Never insert fingers, pencils or any other objects
through the grille while the fan is operating.
•Completely assemble the fan before switching it
on.
ASSEMLY INSTRUCTIONS
AQUILLO:
1.Fit the Pie onto the base and secure correctly us-
ing the screws supplied.
ing the screws supplied.
2.Fit the rear grille and secure with the plastic sup-
port nut. Make sure that the handle faces upwards
and the plastic pins are aligned to the correspond-
ing holes on the rear grille for perfect coupling.
port nut. Make sure that the handle faces upwards
and the plastic pins are aligned to the correspond-
ing holes on the rear grille for perfect coupling.
3.Fit the fan propeller and secure with blade sup-
port nut. Ensure that the drive pin that goes through
the motor axle fits securely in the grove at the back
of the propeller.
port nut. Ensure that the drive pin that goes through
the motor axle fits securely in the grove at the back
of the propeller.
4.Insert the front grille through the top of the rear
grille. Fit the rear grille clips onto the front grille.
Check that the grille safety screw holes are aligned
at the bottom of the grille. Secure and tighten the
grille. Fit the rear grille clips onto the front grille.
Check that the grille safety screw holes are aligned
at the bottom of the grille. Secure and tighten the
grille safety screw.
INSTRUCTIONS FOR USE
•Connect the appliance to the mains.
•Select the airflow required using the buttons:
•Select the airflow required using the buttons:
0. Stop fan
1. Minimum air flow
2. Medium air flow
3. Maximum air flow
1. Minimum air flow
2. Medium air flow
3. Maximum air flow
•To completely stop all the fan functions, turns the
timer control to the O position.
timer control to the O position.
SWING AND TILT
•The fan head can swing from right to left, sweep-
ing air from a certain area. To do so, simply press
the swing control.
•To set the fan head, pull the swing control and turn
the head to the required position.
•To tilt the fan head, loosen the tilt control by hold-
ing onto the grille and motor casing with both hands
and resetting it to the required position.
ing air from a certain area. To do so, simply press
the swing control.
•To set the fan head, pull the swing control and turn
the head to the required position.
•To tilt the fan head, loosen the tilt control by hold-
ing onto the grille and motor casing with both hands
and resetting it to the required position.
CLEANING
•Unplug the appliance and allow it to cool before
cleaning.
•On removing the front grill to clean the propeller,
make sure that the fan is unplugged before remov-
ing the guard.
•Clean the equipment with a damp cloth with a few
drops of washing-up liquid and then dry.
•Do not use solvents, or products with an acid or
base pH such as bleach, or abrasive products, for
cleaning the appliance.
•Do not submerge the appliance in water or any
other liquid.
cleaning.
•On removing the front grill to clean the propeller,
make sure that the fan is unplugged before remov-
ing the guard.
•Clean the equipment with a damp cloth with a few
drops of washing-up liquid and then dry.
•Do not use solvents, or products with an acid or
base pH such as bleach, or abrasive products, for
cleaning the appliance.
•Do not submerge the appliance in water or any
other liquid.
MW_CO35810_AQUILO DESK_FAN_IM.indd 3
MW_CO35810_AQUILO DESK_FAN_IM.indd 3
7/8/2009 11:27:35 AM
7/8/2009 11:27:35 AM