Rinnai REU-V2520FFUD ユーザーズマニュアル

15,000

180,000

120°F

140°F

120°F

140°F

140°F

185°F

140°F

185°F

98°F

120°F

49 Lbs.

87%

49 dB (A)

Normal

75 watts

Standby

5.5 watts

Anti-frost Protection

100 watts

Electronic 

Fixed

None

Natural Gas

6" W.C.

Propane

10" W.C.

Natural Gas

10.5" W.C.

Propane

13.5" W.C.

Ignition System

Water Temperature Control
Water Supply Pressure

Electric Connections

Minimum Water Pressure: 20 PSI (Recommended 30-80 PSI for maximum performance)

Safety Devices

Maximum Water Supply Pressure
Remote Control Cable

Flame Failure - Flame Rod

Boiling Protection - 210°F

Over Current - Glass Fuse (3 amp)

Remaining Flame (OHS) 207°F Bi-Metal Switch

Thermal Fuse 264°F

Direct Electronic Ignition

Appliance: AC 120 Volts, 60Hz.         Remote Control: DC 12 Volts (Digital)

Simulation Feedforward and Feedback.

Gas Supply: 3/4" MNPT,  Cold Water Inlet: 3/4" MNPT,  Hot Water Outlet: 3/4" MNPT

Minimum Gas Consumption Btu/h

Maximum Gas Consumption Btu/h

With or without remote controls, mounted in kitchen, bathroom, ect.

Connections

By-Pass Control
Minimum

Gas Supply 
Pressure

Maximum

Gas Supply 
Pressure

Type of Appliance
Operation
Exhaust System
Approved Gas Type

Electrical
Consumption

Hot water capacity, (50°F rise)
Hot water capacity, (35°F rise)
Default Temperature Setting (no controller)

Maximum Temperature Setting
Minimum Temperature Setting
Weight

Noise level

Efficiency Rating

Automatic Frost Protection - Bi-Metal Sensor & Anti-Frost Heaters

Combustion Fan RPM Check - Integrated Circuit

150 PSI

Non-Polarized Two Core Cable

0.6 to 5.3 GPM

0.6 to 5.3 GPM

Direct Vent - Forced Combustion

Natural Gas or Propane - Ensure unit matches gas type it's being installed on.

0.6 to 6.5 GPM

0.6 to 8.5 GPM

Temperature controlled continuous flow gas hot water system.

104°F

140°F

104°F

140°F

Controller Default Temperature Setting

S P E C I F I C A T I O N S

NOTE:  Rinnai  is  continually  updating  and  improving  products,  therefore,  specifications  are 

subject to change without prior notice. Local, state, provincial and federal codes must be adhered 

to prior to installation.