Heath Zenith 598-1172-04 ユーザーズマニュアル

-3-

Screw

Mounting 
Orientation 
Marking

Cover Pin Locations

Mounting Hole

Wall Anchor
(If Needed)

Mounting Hole

8.   Mount chime. Determine mounting loca-

tion.
•  Place chime against wall and verify the

chime is level. Note: See chime base for 
correct orientation.

•  Use  all  4  chime  mounting  holes  as  a

template (see Figure 8). Note: 2 mount-
ing  holes  are  located  inside  battery 
compartment. Remove batteries before
mounting.

•  Drill 7/32" diameter pilot holes for wall

anchors (provided) and insert anchors.
Note:  Always  use  wall  anchors  if  not
mounting directly into a stud.

•  Verify chime is level and tighten screws

securely.

•  Install  batteries  removed  previously.

Make sure batteries are oriented prop-
erly (see Figure 4).

•  Place  chime  cover  onto  chime  base

(See step 6 to determine cover mount-
ing type).